Project: SUNLIKE LT1 board (Option for 660nm Red)

[Xylnas]

@SunLike

about wholesale price for LT1… I already contact with 3 persons about it

It is not interesting. Because retail price is 37+2$ with shipping inside China. Wholesale price is almost the same :person_facepalming:

Aliexpress price is 49$ (without batteries), from their site (sofirnlight) 57$ with batteries and international shipping

So, there is no reason to resell it with SunLike leds. Also they can not sell without pcs.

I think that they are not manufacturers, just resellers.

May be future project will be create my own SunLike flashlight based on cheap flashlight… may be yes, may be no, who know…

Is that 37 + 2$ for each full LT1 or just the empty body with the intention to replace with your board?

I am definitely interested in a 2700k + 660nm DR LT1 board. I haven’t had any experience modifying lights before, how tricky would it be to swap the board out for a SunLike one?

[SunLike]

@Xylnas

@SunLike

about wholesale price for LT1… I already contact with 3 persons about it

It is not interesting. Because retail price is 37+2$ with shipping inside China. Wholesale price is almost the same :person_facepalming:

Aliexpress price is 49$ (without batteries), from their site (sofirnlight) 57$ with batteries and international shipping

So, there is no reason to resell it with SunLike leds. Also they can not sell without pcs.

I think that they are not manufacturers, just resellers.

May be future project will be create my own SunLike flashlight based on cheap flashlight… may be yes, may be no, who know…

Is that 37 + 2$ for each full LT1 or just the empty body with the intention to replace with your board?

I am definitely interested in a 2700k + 660nm DR LT1 board. I haven’t had any experience modifying lights before, how tricky would it be to swap the board out for a SunLike one?

no, it is full set without batteries
solder 3 wires and change 4 screws + add thermal paste

[Xylnas]

@SunLike

@Xylnas

@SunLike

about wholesale price for LT1… I already contact with 3 persons about it

It is not interesting. Because retail price is 37+2$ with shipping inside China. Wholesale price is almost the same :person_facepalming:

Aliexpress price is 49$ (without batteries), from their site (sofirnlight) 57$ with batteries and international shipping

So, there is no reason to resell it with SunLike leds. Also they can not sell without pcs.

I think that they are not manufacturers, just resellers.

May be future project will be create my own SunLike flashlight based on cheap flashlight… may be yes, may be no, who know…

Is that 37 + 2$ for each full LT1 or just the empty body with the intention to replace with your board?

I am definitely interested in a 2700k + 660nm DR LT1 board. I haven’t had any experience modifying lights before, how tricky would it be to swap the board out for a SunLike one?

no, it is full set without batteries
solder 3 wires and change 4 screws + add thermal paste

Sounds great, I have placed an order for a 2700k + 660nm Red. Would be cool to put this in the red anodised body spoken about in the LT1R thread if that does end up being produced by Sofirn.

[SunLike]

You are 1st who ordered with red 660nm =)
s. actually I think that 3200k+660nm or 4000k+660nm will be best for me

[Xylnas]

Wow that’s surprising! I expected a lot of people to want warmer tints/red with the requests for 2200k and warmer!

With my current LT1, I much prefer the warmer white and have found myself keeping it at the warmest setting more often so I have no need for another lantern with cooler LED’s. I have enough torches for that purpose.

I would love to have a 2700k warm white into red for outdoor use late at night. Excited to see the project progress

[sixhundredmiles]

Following this with interest. I really wish my lantern could go significantly warmer than 2700k (ideally it’d be about 1900k-4000k) so I am interested to see the results of mixing red into 2700k. Maybe I should just order a board experimentally? it’s not terribly expensive after all…

[Xylnas]

@sixhundredmiles

Following this with interest. I really wish my lantern could go significantly warmer than 2700k (ideally it’d be about 1900k-4000k) so I am interested to see the results of mixing red into 2700k. Maybe I should just order a board experimentally? it’s not terribly expensive after all…

These were my thoughts exactly, having a second purely warm LT1 would be excellent.

[SunLike]

I just ordered this flashlight on the aliexpress for only 38,5$ (reg price is 49$ + 2$ coupon frome seller + 5$ from aliexpress + sale discount) without batteries with international shipping

I hope I will received it under 1 month

[Xylnas]

@SunLike

I just ordered this flashlight on the aliexpress for only 38,5$ (reg price is 49$ + 2$ coupon frome seller + 5$ from aliexpress + sale discount) without batteries with international shipping :face_with_monocle:

I hope I will received it under 1 month

That’s a good price, I think I paid £52($72). Hopefully it is delivered quickly to you! :+1:

[PatX]

Interested!

Placed order for 3x boards

[SunLike]

@PatX

Interested!

Placed order for 3x boards

nice :money_mouth_face:

I just sended paypal information to your email :face_with_monocle:

[SunLike]

Good news, everyone!

[MtnDon (Don Miller)]

[djozz]

Cool.
How do you like it? (apart from the absence of SunLike leds)

[SunLike]

@djozz

Cool.
How do you like it? (apart from the absence of SunLike leds)

My 15M Telegram: Contact @sunlikenews

Is Much better

[djozz]

Can’t deny that is a very nice build

[SunLike]

[SunLike]

[SunLike]

my Sofirn BLF LT1 with Samsung LH351D LEDs spectrums (<1% flickering in all modes) when cold body:

[SunLike]

Finally…
v.0.99