Interested
Interested, SST20 4000k if it exists, otherwise 219c 4000 or 5000k
Taller than DQG @74.1mm.
In the photo it seemed smaller than the RovyVon A23, and I put the A23 side by side with the DQG Slim Ti and this one was bigger by 1 or 2 mm.
In any case, it will be quite small 
And I like it 
I have a feeling we won’t know that until someone gets one and takes it apart. My money is on it being a FET+1 instead of a FET+7+1.
If that’s the case the FWAA will be TINY. The A23 is the same size as the A24, it’s next to an FW3T in these pics.
Interested. Nichia 4000K.
Interested in the Nichia 4000k + 3000k
Interested for SST20 4000 if that’s available. If not, Nichia 4000
Interested! Please put me down for one SST20 4000k and one Nichia 4000k with pocket clips.
Please add me to the list, this looks great.
Interested
Interested in 1. 219c 3000k
Interested
Freeme, thanks for updating us with these important pictures, measurements, and details. I want to confirm that the 15.9mm diameter is for the MCPCB or the opening ?
It will sure
And that combo you have there is also sweet :sunglasses:
Would be nice if it was for the PCB, then it would be possible that a 16mm single led PCB would also fit without major moddings :innocent:
Which is why I ask. I mean in reality sanding 100 microns of the diameter of the the mcpcb isn’t the end of the world, but is just a frustratingly close fit.
E21As or 219Bs are what this needs btw. I’d so much rather see this as a single emitter though. Anything other than the best Nichia bins are going to be above BBL at the currents this host/cell can sustain for any reasonable time. I think I’ll plan on SW45Ks sliced to eek out whatever cd/lm I can get here.
Freeme: Please ask Neal/LT about the possibility of a single emitter version and a triple mcpcb for Nichia E21a/E17a.
Also, the optic isn’t protected by a glass lens, which honestly I prefer in this case, but please pass on the interest that many here will have in acquiring spare optics to replace as they get scratched/dirty over the years.
Lastly, I wonder how the Ledil optic would work in this for a single emitter swap/mod. Can’t recall the model name, we discussed it in the D25 headlamp thread…