KC1 keychain light is available now

T6 and V2 are bins, for brightness or lumens output, not color, tint, BBL related, etc. Explained here: https://flashlightwiki.com/Brightness_Bins

The wiki has some good basic info, though dated, it's pretty much all or mostly relevant.

T6 is a brightness bin, 8D is the chromaticity bin, you need to check the XP-L datasheet , T6 means 280-300lm at 1050mA, 8D is below the BBL. For reference kaidomain has a 90CRI XPL HI T5 7C1, one bin lower and above the BBL, so I guess this a good deal.

XPL HI at 3000K is too warm for me.

I wonder if I can get a high-CRI XPL HI light by combining 2 or 3 of these high CRI XPL HI leds with maybe 1 low-CRI cool white XPL HI.

Thank you. Foundation of understanding is progressing. I am appreciative.

Hi Hank. Do you have a measurement of the lumens output and the throw of a KR4 and / or a D4V2 with these LEDs?

T8 8D should be 10% less brighter than the higher bin LED like XP-L HI V2/V3.

Noctigon KR4 Ti all colors available,

According to the Cree XP-L spec sheet, lowest luminosity for the 8D bin is 280 while for the V2 is 400, so looks more like 30%, in theory. I was wondering if you had measured one to make sure.

Awesome! I have another chance!

Hank any info on the new light DT8?

Looks like 2 choices now on Raw Ore titanium D4V2 as well as KR4 colors returning.

I missed out the 2850K XP-L HI 8B few months ago and now just ordered the 8D. Couldn’t find any beamshot and tint photos online hopefully it is good!

Truly impressed with the look of my new cyan d4v2 with cyan back light . Photos don’t do justice .

Me too. When’s that coming out? :heart_eyes:

You Firelight2 are playing with me ? Right ? Already a photo shown here . An cyan d4v2 with white boot is a beauty by itself and the total effect is very cool .

Which driver would be used for a D4V2 with this LED?

So glad to hear it ! and thanks again for helping me figure that out! My cyan with cyan switch and gray with amber swtich should be here tomorrow or Monday! Also, I didn’t even think about how nice it would look just having the white boot on them. Excited!

Where do you order aluminum D4v2 with lighted switch? I don’t see a link to that option on International Outdoor website?

Email Hank with your desire ; he will ask your order number if he says fine .

ATTN: KR4 fans

Does anyone else wish that the kr4 “colorful Ti” came in the “blue wavey clouds” and “blue swirls” that the D4v2 comes in?

I feel like yet again we (the few of us that seem to love both lights but prefer the KR4) are being shadowed by that damn D4… lol. jk… kindve…

Hank, make the KR4 colorful Ti in Blue Swirls, please?? :smiley:

I havent bought a colorful Ti, but I would if those colors were options.