thank you
There is any estimate of when reviewers will start to receive samples? I’m just curious to see it.
I’m not a reviewer of this one (or any other, in any real sense of the word, given the quality of reviewers we’re fortunate to have on BLF), but will happily post my first impressions for you when I receive it
Nice!
Has your order already been shipped?
I hope so... haven’t received notification though
eager...
Yup. I like this light, but I already have a pile of lights that need the cool white emitters replaced and I’m getting tired of swapping LEDs. I’ll order one when it has neutral/warm LEDs.
ugh. I wish this used Carlco optics so I could customize the beam.
I really thought Emisar would have made a light like this by now… (essentially 21700 D4)
short tube 20350 available for TS21, HD20 now, compatbile 16340, 18350,
Don’t miss the 20350 battery tube, we are not sure how many pcs we will make.
There is any estimate of when reviewers will start to receive samples? I’m just curious to see it.
What would you like to know?
Wurkkos Terry:6500K for this batch.
Aah that’s too bad but I get it, guess I’ll order one later
5000K and 4000K available on sofirn aliexpress store.
standard wurkkos rubber switch, and one way deep carry clip (clip is not that important).
The switch is deal breaker for Me, because I already have lumintop fw21 on SST-20 4000K (if I didn't have it, I would buy).
TS21 is the best USB C high CRI "budget" tri lens flashlight I can see so far :THUMBS-UP: , almost perfect, but that switch. It's not bad, but why use different switch.
Fescron: Wurkkos Terry:6500K for this batch.
Aah that’s too bad but I get it, guess I’ll order one later
5000K and 4000K available on sofirn aliexpress store.
Nice! There are a few things I’d like to know before buying one though, can somebody who already has one verify these for me please?
- Is the magnet easy to remove? I don’t really want a light with a magnet in my pocket…
- What is the driver? I suppose PWM/FET instead of constant current buck driver because it’s not mentioned anywhere?
- Are there pads available to flash another version of Anduril?
- Does the light charge with USB-C -> USB-C cables?
Thanks!
I’ll wait for the driver confirmation first.
kokosnh: Fescron: Wurkkos Terry:6500K for this batch.
Aah that’s too bad but I get it, guess I’ll order one later
5000K and 4000K available on sofirn aliexpress store.Nice! There are a few things I’d like to know before buying one though, can somebody who already has one verify these for me please?
- Is the magnet easy to remove? I don’t really want a light with a magnet in my pocket…
- What is the driver? I suppose PWM/FET instead of constant current buck driver because it’s not mentioned anywhere?
- Are there pads available to flash another version of Anduril?
- Does the light charge with USB-C -> USB-C cables?
Thanks!
Received my review example
- Define your opinion of easy, i think it should be doable
- it has PWM
- there are NO flashing pads on the driver
- yes, it is USB C - C compatible
It does not say which emitters or tint it is, there wasn’t even a manual inside the box.
The tint looks a bit warmer than my 6500 K TS30, it shows a greenish hue on lower modes
- it has PWM
- there are NO flashing pads on the driver
Too bad. Initially they said buck driver and with flashing pads.
Fescron: kokosnh: Fescron: Wurkkos Terry:6500K for this batch.
Aah that’s too bad but I get it, guess I’ll order one later
5000K and 4000K available on sofirn aliexpress store.Nice! There are a few things I’d like to know before buying one though, can somebody who already has one verify these for me please?
- Is the magnet easy to remove? I don’t really want a light with a magnet in my pocket…
- What is the driver? I suppose PWM/FET instead of constant current buck driver because it’s not mentioned anywhere?
- Are there pads available to flash another version of Anduril?
- Does the light charge with USB-C -> USB-C cables?
Thanks!
Received my review example
- Define your opinion of easy, i think it should be doable
- it has PWM
- there are NO flashing pads on the driver
- yes, it is USB C - C compatible
It does not say which emitters or tint it is, there wasn’t even a manual inside the box.
The tint looks a bit warmer than my 6500 K TS30, it shows a greenish hue on lower modes
Thanks for the answers!
Yokiamy:
- it has PWM
- there are NO flashing pads on the driver
Too bad. Initially they said buck driver and with flashing pads.
Yeah that’s kinda disappointing. I guess I’ll stick to my Sofirn IF25A for now…
lfb:There is any estimate of when reviewers will start to receive samples? I’m just curious to see it.
What would you like to know?
So, Wurkkos, you lied about the driver.
See the post above where the test showed PWM and you said initially it is buck driver.
Do you know what buck driver is?
I was gonna say Adam Driver’s and Minnie Driver’s cousin, but…
Fescron: Wurkkos Terry:6500K for this batch.
Aah that’s too bad but I get it, guess I’ll order one later
Yup. I like this light, but I already have a pile of lights that need the cool white emitters replaced and I’m getting tired of swapping LEDs. I’ll order one when it has neutral/warm LEDs.
Now you can order 4000K, or 5000K on our website.