What blade did you EDC today?

Oh I see what you meant now. It’s possible it’s a fake, but he got it as a TSA confiscated resale. You can find some amazing deals that way if you live near the right airport. Some places have people who know knives look over them to maximize their profits. Some places just want to get rid of them. I once saw a guy post a box he got with a Sebenza in it.

My new Sanrenmu - Land 820 with titanium handle & VG10 blade:

Yeesh!

That handle looks pretty jagged.

Sorry, my dog just chewed it! :laughing:

Your dog has some strong teeth!

Looks like CRK copy.

Sanrenmu makes a whole bunch of variations of that design in their Land series. The design was obviously inspired by the relevant CRK knives. While the closeness of the overall design bugs me a little, there are key differences. The main ones are that the Land knives I’ve had are all liner-locks that run on bearings. (There is a video somewhere that goes into depth on the differences.) The more common G-10 versions use 12C27 and cost around twenty bucks.

If CRK had a budget version, I might care more than I do now. Especially given that the CRK knives cost more than twenty times as much, or often more than ten times as much for the titanium models, I’m in the economic camp where this doesn’t negatively impact CRK. If anything, positive experiences with the Land series have sparked my interest in CRK.

That said, the Land series based on CRK is surprisingly well-made in my experience. The G-10 models represent some of the best knives in the best steel at their respective price.

I was similarly concerned about the ergonomics on that model. I’d love to get that dog’s dental routine!

Case Caribbean Blue Smooth Bone Slimline Trapper .

I got a Kizer Yorkie in micarta last friday and I died the scales with bright orange RIT-die (mix of daffodil yellow and racing red). Because the micarta was dark grey already (black resin with grey fabric, the die only colours the fabric), it turned out a nice brown. I think the stock grey is really cool, but the brown looks more friendly, which is important since I use it for daily things, with people around me.

It replaces my Civivi Elementum for EDC which I eventually found too large to have loose in the front pocket. Just as with the Civivi I removed the clip of the Yorkie, me being lefthanded the righthanded clip is irrelevant.

Stock:

Died (with some small raindrops):

From an angle the colour is stronger:


With the Elementum that it replaces:

After a while in my pocket the colour will become much duller from handling it (the Civivi had way brighter coloured scales at first), but that is how it goes.

It looks much more interesting than the plain grey color! :+1:
I’m wondering how jade G10 would look like with daffodil yellow.

Carried this nice little vintage Colonial I just got .

Protech Godfather (:

I discovered this little Giant Mouse ACE Sonoma designed by Vox and Anso and made by Reate Knives. It’s a very nicely executed knife with nice attention to detail. I polished the M390 blade and anodized the Ti bits purple, along with the deep carry clip. Been carrying it as my EDC backing up the big fixed blade Emperor.

.
Nice Dale :heart_eyes:
Where do you get your dye for anodizing ?
After we get a workshop in a year or two, I want to get a small Anodizing set up. :+1:
.

Curtis, Titanium can be colored with flame or with electricity in a bath of a caustic solution… I use Borax in water but even Coke will work. I bought a 5A/120V power supply to do this, and Titanium wire to suspend the parts. Pretty simple really.

This pretty well shows the color range, lower voltage comes in a dark bronze and a very high voltage can net a brilliant green, takes about 112V to get the green.

This is a Spyderco Paramilitary 2 with aftermarket scales and clip, Maxamet blade.

Playing with my Koenig Arius…

Schrade 50T Water Buffalo Horn Scales .

I have a 140 volt variac Variable transformer that can be used with an isolation transformer ( if I can find one ) after figuring out how to wire it. Ti is expensive to machine. Those covers are beautiful. :heart_eyes:
.

I had been eyeballing that knife for a few days now. Your pictures finally got me to order one. Had a hard time finding the Micarta version. Lots of the Ti versions though.

Thank you for making me spend more money djozz. :slight_smile:

I’ve got my DC power supply for around $85 shipped from aliexpress. It’s working fine and also helps when you have no charging cable for a specific battery type. Look for KPS1201D to get the 120V version so you can anodize green.