Will you be using the standard driver, with the TK 219 firmware? That is what I have done to your lights I have modded with 219b and they work very well.
Sorry for being so inquisitive. Can I order DT8 with 219B SW45K choosing another emitter from your website? Or better wait for your website to be updated?
Could anybody please advise with the knowledge they have on sw35 and sw45 which one may be rosier? I'm leaning heavily toward 3500, bmjusg because I prefer a warmer color more, but if one is rosier than the other that would take precedence for me.
sw45 and sw35 are the same in rosiness, with the sw35 being warmer, of course. But Hank does not offer sw45, he offers sw45k which are significantly more rosy than sw35. They are also 10% brighter. I hope that helps.
Before I order the D4V2 with sw-45k’s… does anyone know if the version of Anduril on this light is at all restricted on the top end for these leds? I have a version of Anduril that I run on my others that changes the voltage colors to something more standard, green/amber/red and I hope I could just drop this firmware on as is. But, it allows the FET full run.
Personally, since that large of color temperature difference is more significant than rosiness differences between standard 219B’s and the special SW45K, I would say get the 3500K based on what you said.
Since both should make really good light, however, I would not call my position a disagreement with those saying get the SW45K. Just a different priority.
I was afraid of that… now I will have to find source and figure out what I did the last time and get the darn compiler set up to make the hex file… The old machine I did that work on died a horrible death. Crap, Crap, Crap! I am not a coder.