【Add a 18350 Tube】Wurkkos HD15/HD15R USB-C Dual Emitters Rechargeable Headlamp(Update)

TheAuditor · July 10, 2021, 10:03am

Is there any further information on the driver?

SammysHP · July 10, 2021, 10:17am

Seems like the driver has a vertical board. There might be a chance that the attiny is accessible through the switch cutout. Like I did with the SC31Pro: Sofirn SC31 PRO, New Anduril Flashlight - #308 by SammysHP

id30209 · July 10, 2021, 12:21pm

I’m sure it does have vertical board. I’ll try to open it next week and update results here.

ch1ir · July 10, 2021, 12:52pm

Will there be an option for a short tube add on with Amazon?

ArtieT59 · July 10, 2021, 6:24pm

JaredM:

Wurkkos Terry:

Any other improvement you would like to see on it?

Yes. # Matte anodizing or raw aluminum. #2 The pocket clip. Please use a one way deeep carry pocket clip. Deeper than the current design. Please refer to the new Noctigon KR4 clip: !{width:60%}https://intl-outdoor.com/media/wysiwyg/KR4TI/IMG_3604_1100px.jpg! Notice a few things: * The clip reaches the end of the flashlight * The starting / open end of the clip has a standoff that allows fabric to easily slide under when inserting it into the pocket. * One direction clip. You already have a second mounting groove near the head for reversibility, don’t make a redundant and bulky clip. #3 Increase the opening of the bezel so that it’s not blocking any light from the optic. Looks like it needs an extra 1-2mm or so in the pic below. !{width:15%}https://i.ibb.co/42PNF96/bgghy41az5t61.jpg! #4 Make 100% sure this optic is compatible / swappable with Carclo 105xx optics.

For improvements, JaredM covers everything i would like to see in an improved version, especially regarding the optics being Carclo or at least Carclo compatible, a one way clip (no 2-way clip needed, it gets caught on everything and no one is putting a 21700 light on their hat lid), and raw anodized finish!

PiercingTheDarkness · July 14, 2021, 1:49am

Tendou · July 14, 2021, 9:33am

So is it regulated? Buck driver?

PiercingTheDarkness · July 14, 2021, 9:51am

I believe it’s FET + Buck charging circuit

dthrckt · July 14, 2021, 12:39pm

Thanks for the review Funtastic. Excited for mine to arrive. I’ll want to test parasitic drain and verify the battery cut-off voltage is good. BTW, now I’ll hear your accent whenever I read one of your comments.

PiercingTheDarkness · July 14, 2021, 2:51pm

Haha. I did test parasitic drain in the last chart at the bottom, just didn’t get round to testing the LVP.

Tendou · July 14, 2021, 6:40pm

Thanks!

Wurkkos · July 19, 2021, 7:06am

Thanks

Wurkkos_Terry · July 23, 2021, 3:14am

Thanks for the review.

Wurkkos · July 30, 2021, 6:48am

trying new colors of TS21

id30209 · July 30, 2021, 7:36am

Yet you failed to answer what type of driver is in…

id30209 · July 30, 2021, 10:26am

I don't care what's on their mind... What I see is a lot of bla, bla and not enough facts.

id30209 · July 30, 2021, 10:33am

I'm not, no worries.

Just as one member here said "flashlighted out" so I just don't care anymore about bs when you see one. Being a specialist in "flashlight colour" means nothing.

So, once again, dear Wurkkos, what driver you have in TS21?

PiercingTheDarkness · July 30, 2021, 10:42am

Might get your answer from Sofirn since they make Wurkkos' lights

id30209 · July 30, 2021, 10:44am

My guess also...but why are you answering?

PiercingTheDarkness · July 30, 2021, 11:55am

Is this not a forum where everyone can comment?

I'm a dealer for both Wurkkos and Sofirn, I also heavily reviewed the TS21 and it is using a FET driver, what more would you like to know?