Anduril 2 Flashlights so far....?

Interesting to know. I wonder if all Hank lights are shipped with Anduril 2 now?

Not all lights are shipped with anduril 2 by default, but you can request anduril 2 for all of our lights before shipping.

Thanks for the info!

Ahh, I guessed right! Figured so, thanks Hank!

Actually I just built Anduril2 for the K1 SBT90.2 a few mins ago, but cranking up the default temp and temp limit. I'm using Microchip Studio on Windows 10 and works like a charm!

I haven’t tried the Emisar/Noctigon and Fireflies models above.

The Lumintop FWAA I’ve tried and it uses Anduril 2. (version check: 2020-09-27, model code ‘312’)
The Lumintop HL3A (new batch) also appears to now use Anduril 2. (version check: 2021-01-25, model code ‘322’)

Regarding the Sofirn Q8 Pro and LT1v2.0 (with powerbank function) = I just got both these models recently, but both of them still run Anduril 1
(Q8 Pro with Anduril date code 2020-03-18 while the LT1v2.0 use Anduril date code 2020-06-02)
Just wondering if anyone has actually received a factory-shipped Sofirn Q8 Pro or an LT1v2.0 that uses Anduril 2 (as of this writing)?

I can't find any listing of the HL3A showing it uses Anduril 2, not Lumintop's sites, not Neals, not Illumn, not the Ali stores. The HL3A is not listed on BG.

I'll keep the Q8 Pro and LT1 listed as Anduril 2 because that's how they are listed on the Sofirn site, front page, guess it's just time before it makes it out to distribution.

I'm sure there are, and will be more confusion of the transition but it seems to be happening, but slowly.

Yes, very slowly. V1 is now ~13 months and ~130 revisions behind, and not maintained any more, so I hope it won’t be used for new lights any more. It basically hasn’t been updated since V2 started, except a couple of small maintenance changes at the request of manufacturers.

I’ll probably merge V2 into the fsm and trunk branches soon, and move V1 into an archival fork like I’ve done for other end-of-life branches.

Ahh, ok. Hopefully that will help end the V1/V2 debates that have been goin on, and also end the purpose of this thread , because it's getting fuzzy, to say the least...

It would be great to flag which lights are reasonably easy to reflash and which are not. Emisars (at least some of them) have a USB dongle but I gather that some other lights require unsoldering the led to get at the MCU. I want to be sure my light always has the latest security patches ;-).

All of our lights can be reflashed by the reflashing kits except D18.

I flashed a couple of K1's with my own tweaked Anduril 2 for example - it's great having this option without dis-assembling anything.

Are there any current or upcoming right-angle/headlamp style lights with Andy 2 in em?

Some Lumintop HL3A headlamps have Anduril 2 pre-installed…

Thanks. I did look those up a month or so ago, but unfortunately all the stores available to me which carry it only stock the older versions. Once I start looking to other stores further away, the added shipping cost starts to make it less attractive an option. I do have my eye open though, if anything pops up.

Is anyone aware of an updated list of Anduril 2 lights being maintained anywhere? I am really hooked and don’t want anything else.

Have you had a look at PRODUCTS

Aside from the Emisar/Noctigon flashlights, most of which are probably already running Anduril 2.

Sofirn is in the process of updating their Anduril lights, I know these models at least already have Anduril 2 versions:
Sofirn Q8 Pro, SP36 BLF Anduril, SC31 Pro, BLF LT1 lantern (IF25A probably also getting Anduirl 2)
Wurkkos TS21 (not sure about the TS30S if it’s been updated to Anduril 2 yet or not)
Astrolux EC06

Can anyone help with a simple guide on importing Anduril code into Microchip Studio - want to rebuild for BLF Q8.

sp10 pro is released with andy 2

at least amazon shows it

wle

Wurkkos TS10

Wurkkos TS21