Noctigon DM11 high CRI middle range thrower available

3939 posts / 0 new
Last post
@Lojik
Offline
Last seen: 1 hour 57 min ago
Joined: 05/20/2020 - 22:36
Posts: 273
Location: Kingdom of Los Angeles

Hank Wang wrote:
With freshly charged 30Q 18650 cells, D18 219B vesion turbo current is 48A at turn on, that is 2.67A per LED,
which I think it’s still within safety line?

In that case, D18 219B version should be with direct drive, no current limit.

So unless I’m reading it wrong, it turns out the D18 with 219B’s, WILL in-fact surpass 10,000 lumen at turn-on? Roger that. Love Love Love

Thanks Hank

Berserker26
Berserker26's picture
Offline
Last seen: 3 months 3 days ago
Joined: 06/03/2021 - 05:41
Posts: 16
Location: Australia
Hank Wang wrote:
We have one D4V2 in Australia, 219B 4500K LED, with flat retaining ring, extra flood optic, 18350 tube, and magnetic tailcap, original price is $60.17, now, 30% off, which is $42, shipping included, for Australian customers only, PM me if you are interested.

PM’d

D4V2 x 2 - XP-L HI V2 5D 4000K
D4SV2 x 2 - SW35 / W2
D18 - 2700K/4000K outer and W2 inner
Astrolux WP3 LEP

@Lojik
Offline
Last seen: 1 hour 57 min ago
Joined: 05/20/2020 - 22:36
Posts: 273
Location: Kingdom of Los Angeles

Hank Wang wrote:
With freshly charged 30Q 18650 cells, D18 219B vesion turbo current is 48A at turn on, that is 2.67A per LED,
which I think it’s still within safety line?

In that case, D18 219B version should be with direct drive, no current limit.

I just did some admittedly ass-backwards math. But at 2.67A per LED, I’m getting about 645 lumen per emitter and over 11,000 lumen at turn-on.

Am I pretty far off, or at least in the correct neighborhood?

iamlucky13
Offline
Last seen: 2 hours 31 min ago
Joined: 06/22/2018 - 09:18
Posts: 1041
Location: USA

@Lojik wrote:
Hank Wang wrote:
With freshly charged 30Q 18650 cells, D18 219B vesion turbo current is 48A at turn on, that is 2.67A per LED,
which I think it’s still within safety line?

In that case, D18 219B version should be with direct drive, no current limit.

I just did some admittedly ass-backwards math. But at 2.67A per LED, I’m getting about 645 lumen per emitter and over 11,000 lumen at turn-on.

Am I pretty far off, or at least in the correct neighborhood?

Here is some community data that should be pretty accurate, as an alternative to trying to read the tiny relative output graph from the Nichia datasheet:
https://budgetlightforum.com/node/53065

Rather than just settle for the closest reported current, I did the math to interpolate and got 605 lumens per emitter. You also have to consider losses from the optics. I don’t know what optic the D18 is using, but a Carclo 10mm TIR is supposed to be 92% efficient with similar sized LED’s, so that makes it 557 lumens per emitter.

That would suggest right at 10,000 lumens, if it really is able to pass 48A at turn on.

@Lojik
Offline
Last seen: 1 hour 57 min ago
Joined: 05/20/2020 - 22:36
Posts: 273
Location: Kingdom of Los Angeles

That makes perfect sense iamlucky13. That would line up exactly with why Hank said 10,000 Lumen. He obviously knows to account for those things too, unlike me. But I understand this a bit more now. Sure almost 11,000 technically, but impossible for the light to actually put that out.

Reminds me of the the difference between what horsepower a car is rated for vs what horsepower the car can actually put out at the wheels. Thanks.

battery
Offline
Last seen: 1 month 3 weeks ago
Joined: 07/13/2014 - 15:39
Posts: 81

I noticed in one of the other posts that the 5000K E21A tested out to be a few hundred K cooler than the rated when driven in these torches. Does this hold true for the 4500K E21A?

lazerEagle
lazerEagle's picture
Offline
Last seen: 40 min 23 sec ago
Joined: 05/20/2020 - 21:11
Posts: 237
Location: Australia
Hank Wang wrote:
We have one D4V2 in Australia, 219B 4500K LED, with flat retaining ring, extra flood optic, 18350 tube, and magnetic tailcap, original price is $60.17, now, 30% off, which is $42, shipping included, for Australian customers only, PM me if you are interested.

Woah! is there an Australia warehouse?!??!? Grad

- the best way to predict the future is to create it -

RamBull
Offline
Last seen: 3 hours 19 min ago
Joined: 06/13/2021 - 13:20
Posts: 108

Just got my Hank UV mule. Just want to say he shipped it with ZWB2 filter installed. Great service and wonderful surprise.

I also got the 16x E21a 2000/5000k mule black body with copper head and warm light switch. It’s just so beautiful. Thank you, Hank!

It also came with two D18s. The first being the D18 sw35. I don’t know how bright it is but I all I can say is that it’s just beautiful.

The D18 SST20 Far Red (730nm)/ SST20 Deep Red (660nm) is just super red. I’m glad I got the deep red because the far red is way to dim.

mattlward
mattlward's picture
Offline
Last seen: 2 hours 37 min ago
Joined: 06/19/2015 - 09:20
Posts: 3235
Location: Illinois, USA

Is this Hank’s new FET driver? This is from my latest 219b D4V2.

!d4v2-219b!

This driver does not seem to have a ML mode that is as low as the ML on my SST20 4000k unit with the older driver. Is that expected? I think I have set the minimum floor at 1.

EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k

ArtieT59
ArtieT59's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

that looks like the new 9amp driver. ML is set at 3/150 i believe. you need to manually set it at 1/150.. 

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

mattlward
mattlward's picture
Offline
Last seen: 2 hours 37 min ago
Joined: 06/19/2015 - 09:20
Posts: 3235
Location: Illinois, USA

I did drop it to 1 if I did it correctly. I think the light is anduril 2 and I do have it in advanced mode.

EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k

mattlward
mattlward's picture
Offline
Last seen: 2 hours 37 min ago
Joined: 06/19/2015 - 09:20
Posts: 3235
Location: Illinois, USA

I found the setting… I had started with the light on, not off. It now has an amazing ML mode!

EDC rotation:
FW1A, LH351D 4000k (second favorite)
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Nichia 4000k sw40 r9080 (favorite light!)
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k

Hank Wang
Offline
Last seen: 5 hours 30 min ago
Joined: 10/19/2011 - 10:28
Posts: 640
Location: China

We have one K9.3 with the configuration below in the EU warehouse, original price is $124.68, now 30% off, which is $87.2
for EU customers only.

Black
Switch back light color:Warm White
CH1 (9 inner LEDs): Neutral White – SST20, 5000K
CH2 (3 outer LEDs): SST-20 Deep Red, 660nm

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

RamBull
Offline
Last seen: 3 hours 19 min ago
Joined: 06/13/2021 - 13:20
Posts: 108

Hank Wang wrote:
We have one K9.3 with the configuration below in the EU warehouse, original price is $124.68, now 30% off, which is $87.2
for EU customers only.

Black
Switch back light color:Warm White
CH1 (9 inner LEDs): Neutral White – SST20, 5000K
CH2 (3 outer LEDs): SST-20 Deep Red, 660nm

I can’t wait for a US warehouse deal. Innocent

Hank Wang
Offline
Last seen: 5 hours 30 min ago
Joined: 10/19/2011 - 10:28
Posts: 640
Location: China

RamBull wrote:
Hank Wang wrote:
We have one K9.3 with the configuration below in the EU warehouse, original price is $124.68, now 30% off, which is $87.2
for EU customers only.

Black
Switch back light color:Warm White
CH1 (9 inner LEDs): Neutral White – SST20, 5000K
CH2 (3 outer LEDs): SST-20 Deep Red, 660nm

I can’t wait for a US warehouse deal. Innocent

This is actually an item returned to the shipping company’s operation center, not a really “warehouse”.

For the US shipping, I kindly ask the customers from the US to make sure the shipping address is correct/valid,
even the zip code is very important, if the shipping address is invalid/incorrect, the package will be
returned to the sorting center, and will be DESTROYED there, there is no way that the package will be
returned to us, or reshipped to the customers. Please spread the words.

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

ArtieT59
ArtieT59's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

Hank Wang wrote:
This is actually an item returned to the shipping company's operation center, not a really "warehouse". For the US shipping, I kindly ask the customers from the US to make sure the shipping address is correct/valid, even the zip code is very important, if the shipping address is invalid/incorrect, the package will be returned to the sorting center, and will be DESTROYED there, there is no way that the package will be returned to us, or reshipped to the customers. Please spread the words.

this is valuable information, thanks Hank! I will mention it.

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

ArtieT59
ArtieT59's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

I also just wanted to mention that there is a great group of people over on Reddit dedicated to the enthusiasm Emisar and noctigon products. They invited me to join a couple weeks ago and it's a fun place to talk among like-minded enthusiasts! Here's a link https://www.reddit.com/r/Hanklights/

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

Hank Wang
Offline
Last seen: 5 hours 30 min ago
Joined: 10/19/2011 - 10:28
Posts: 640
Location: China

Hank Wang wrote:
We have one K9.3 with the configuration below in the EU warehouse, original price is $124.68, now 30% off, which is $87.2
for EU customers only.

Black
Switch back light color:Warm White
CH1 (9 inner LEDs): Neutral White – SST20, 5000K
CH2 (3 outer LEDs): SST-20 Deep Red, 660nm

bump

https://intl-outdoor.com, Noctigon, Emisar, flashlight components.

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 1 month 1 week ago
Joined: 03/01/2018 - 04:39
Posts: 3196

If only this K9.3 had 219B SW35 or SW45K in CH1, I would immediately take it. Love

lionheart_2281
lionheart_2281's picture
Offline
Last seen: 1 day 22 hours ago
Joined: 10/25/2012 - 18:32
Posts: 3132
Location: Brisbane, Australia

Hank Wang wrote:
Hank Wang wrote:
We have one K9.3 with the configuration below in the EU warehouse, original price is $124.68, now 30% off, which is $87.2
for EU customers only.

Black
Switch back light color:Warm White
CH1 (9 inner LEDs): Neutral White – SST20, 5000K
CH2 (3 outer LEDs): SST-20 Deep Red, 660nm

bump

You should make a separate thread for these great deals so they don’t get lost in the chatter about your awesome lights

stephenk
stephenk's picture
Offline
Last seen: 14 hours 2 min ago
Joined: 01/30/2016 - 05:09
Posts: 1856
Location: Australia
daffyh67
Offline
Last seen: 1 week 1 day ago
Joined: 07/30/2019 - 02:48
Posts: 45

Read it from link @ reddit, i posted there too..
It’s my new koala spotting light and i dig the rectangle head.
had to remap the mind a little for Anduril 2 but didn’t take long.

stephenk
stephenk's picture
Offline
Last seen: 14 hours 2 min ago
Joined: 01/30/2016 - 05:09
Posts: 1856
Location: Australia

daffyh67 wrote:
Read it from link @ reddit, i posted there too..
It’s my new koala spotting light and i dig the rectangle head.
had to remap the mind a little for Anduril 2 but didn’t take long.

Thanks. I’m surprised I didn’t knock any Koala’s out of trees with all those lumens.
I’ve also now found a compatible diffuser for the DT8 – the 22-50mm diffuser from Kaidomain, so have updated my review.
bcm00re
Offline
Last seen: 1 month 4 days ago
Joined: 07/19/2019 - 01:00
Posts: 143
Location: St. Louis, MO

What is the quantity/pricing on the Nichia 219BT-V1 3500K & 4500K LEDs? And the shipping cost/time to the US?

Kos70
Offline
Last seen: 20 hours 32 min ago
Joined: 03/23/2020 - 09:30
Posts: 130
Location: Kiev

Hank Wang][quote=Hank Wang wrote:
]bump

Obviously - not the topic. But Henk; why do you stubbornly refuse to make head lamp !? It looks like you're the only decent manufacturer that doesn't have them in the lineup ... That's a decent chunk of the market. undecided

 

Lux-Perpetua
Lux-Perpetua's picture
Offline
Last seen: 1 month 1 week ago
Joined: 03/01/2018 - 04:39
Posts: 3196

Members from Europe: FYI, today I have received a three pages letter from FedEx with an invoice charging me EUR 10.57 (EUR 4.62 EU Import Tax + EUR 5.00 processing fee + 19% German VAT) for my recent order from Int‘l Outdoor Flashlights. Most interesting is the fact that FedEx charged me these costs three weeks after receipt of order. 

 

stephenk
stephenk's picture
Offline
Last seen: 14 hours 2 min ago
Joined: 01/30/2016 - 05:09
Posts: 1856
Location: Australia

Kos70]<p>[quote=Hank Wang wrote:
Hank Wang wrote:
]bump

Obviously – not the topic. But Henk; why do you stubbornly refuse to make head lamp !? It looks like you’re the only decent manufacturer that doesn’t have them in the lineup … That’s a decent chunk of the market. undecided


 

I would love to see something like a Noctigon 3.1 headlamp, 3 emitters on one channel, 1 on another.
ArtieT59
ArtieT59's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

Ohhh that'd be nice!

 

 

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

ArtieT59
ArtieT59's picture
Offline
Last seen: 6 hours 36 min ago
Joined: 02/25/2020 - 17:55
Posts: 3163
Location: CT, USA

Hank- 

 

sandblasted Titanium! (D4v2.. ) sandblasted titanium! (Kr4..) sandblasted Titanium! (Anything you want..) sandbla.... 

 

ok, I've made my point.. 

[FLF] Five Light Friday https://budgetlightforum.com/node/78749

Check out some of my new lights (picture heavy) and quick first impressions of them here: https://budgetlightforum.com/node/77180

My Sft40 beamshots / comparison thread: https://budgetlightforum.com/node/78100

norve
Offline
Last seen: 2 weeks 3 days ago
Joined: 10/18/2019 - 05:21
Posts: 19
Location: Vietnam

Hank,

I received the KR4 mule 16 and the D4s2 Blue Swirl which looks awesome, thanks a lot for the beautiful color.

Only Hanklights

Pages