Convoy S2+ Triple Nichia 219B 4500K

Any ideas where to buy the 219B chips from? I’m struggling to find them on aliex

Nice I’ll just wait for the convoy product then, hopefully it’ll be available for the S2+ :slight_smile:

Is it really from a standard lighted tail switch ? cause I recently built another triple and stuck a lighted tail switch but its very dim compared to the one in the video, though I did use a blue to match the blue host.

Simon also sells these at the moment. In 3000k, 3500k and 4500k. If you order double of everything and send it all to me, I’ll build two, send you one and keep one as payment? :wink:

I would love to buy a few of these. Never understood why convoy does not make one like this.

Get the emitters from Azhu here on BLF https://budgetlightforum.com/t/-/57715

I learned to reflow emitters from this tutorial by our own Vesture of Blood https://budgetlightforum.com/t/-/39482

I couldn’t find the chips, link me to all the bits we need so I can see how much it adds up to?

Hi that’s me. I got the bare Leds 219B from Convoy (AliX), optic (bicom) and mcpcb from KD. The driver is the “new (R020)” version 12 Groups 55 Modes 5A. It pulls 5.7A max with that triple.

Yes it is, just add bypass. The one that pushed the output of that Lighted Switch is a bleeder resistor. I used the 330 Ohm (331).

Nice work. I want one!

Thank you! The plan is I want to sell it locally in my country at around $45, but haven’t upload the products yet.

As if you want to build that by yourself, the parts is available in Convoy Flashlight Store and KD. If you want the Carclo optics and Noctigon board, you can buy them at intl-outdoor.com. You can make the spacer at your local machinist or just order it from kiriba-ru.

Is that for the whole light or just the emitter?

Awesome man. Wish you live here in the States. I would love to get one of your custom pieces, but shipping might be a pain to Cali.

I’m willing to buy one of these if the shipping to UK isn’t too crazy. 3x219B with a 5A driver, don’t need a fancy lighted tailcap.

Whole light, include the 18350 body. But no battery included, the price is a bit high for it’s specs because there’s some taxes and the copper spacer cost me around $8 each at my nearest machinist :’

How much for one shipped to the UK?

I’m sorry, I don’t have access for the international shipping. I hope there’s a member here that would build you the flashlight, especially near you nor at least still in the same country.

Quad 219B would indeed be awesome

negev, I am not sure if he can do it, if he is available or willing to put that light together for you, but try to reach member G0OSE (https://budgetlightforum.com/user/12792), as I’ve seen some stuff he modded and it looks good.

And he is in the UK.

I just built S21A quad with 4500K 219b’s. With Kaidomain quad TIR and pcb it needed about 6mm high and 22mm wide flat spacer. Because its flat, it is easy to make yourself. If you have round stock aluminium or copper, you only need saw. Kaidomain TIR was perfect match to S21A. I used Led4Power 12 A driver.