Can I run a 10440 cell in the olight I3T?

3 posts / 0 new
Last post
CREEXHP70LED
CREEXHP70LED's picture
Offline
Last seen: 11 hours 6 min ago
Joined: 01/03/2019 - 13:16
Posts: 276
Can I run a 10440 cell in the olight I3T?

Title says it all. I have seen videos where it has been done, but don’t know if it will fry it in a short period of time.

  •  

 

 

86250rrippin
Offline
Last seen: 1 hour 46 sec ago
Joined: 04/13/2020 - 22:45
Posts: 24

I have seen this done, and its pretty bright ! I would just be careful, when it gets pretty warm…shut her down. Olight says ABSOLUTELY NOT, but its a 20 dollar light . If you burn it up dont try to return it just buy another. I have a few of these and like the tail clicker on these.

Sofirn BLF LT1Lantern, Sofirn BLF SP-36 , Thrunite TC-20 , Thrunite Catapult V6 , Firefies E01 , Astrolux C8 , Emisar D4v2 , Folomov 18650s , Lumintop FW3A , Thrunite T10T V2 , BLF A6 , Wurkkos WK30 , Olights , Streamlights , and one Old-School Maglite 3 cell D.

darosk
darosk's picture
Offline
Last seen: 4 hours 46 min ago
Joined: 10/06/2019 - 22:03
Posts: 234
Location: Sabah, Malaysia

A lot of people do, myself included. It gets pretty warm but so far I haven’t seen any adverse effects. I don’t run it on high for long though, 30 seconds to a minute at a time.

My Lights (Updated: June 20, 2021)