I’m sorry for the beggining text - it should be SFN55.2, not SFT55.2 :person_facepalming: My mistake, but I hope those beamshots will be helpful for you all!
Let me find out.
Mine came in! Unfortunately just after Thanksgiving long weekend and it came in black when I had ordered a blue one. Hopefully Neal can fix despite it being sold out.
This is only my second light after a gen1 FW3A so I have nothing to compare it to. First impression is that it’s much smaller than what I was expecting (seeing it in person is very different than just reading reviews I guess). I also wasn’t expecting it but you can see the yellow led die in the centre of the hotspot when shining it on a white wall. Ramping up to the appropriate brightness makes it go away. I’m powering it with an 18650, solid contact but the springs aren’t fully compressed so I can feel a slight rattle and sometimes you can feel the vibration of the springs (boing!).
Super excited to keep testing this light.
Keep in mind 3 things:
-Double click from ON is Turbo, just like the FW3A.
-Use the 18650 with a plastic sleeve (26650 adapter) to prevent rattling.
- Buy a 21700 battery and forget the 18650.
Have fun with your new light!
Got mine today, really happy with it overall. It is a relatively speaking a very large single cell light. Throw was a what I thought given the area of the LED. I lit up an area down a residential neighbor street about 200 meters to the end of the street. House at the end was well lit with enough spill to light up the yards along the way. It really is the brightest single LED I’ve ever played with. It warmed up within 20 seconds to the feel the heat begin to bleed out. Thermal protection was kicking in after about 30 seconds. Got warm to very warm after a few minutes, I had keep double tapping turbo. Just above the switch stayed much cooler. Running mine on a 26800 battery with it’s lowest mode so lower the 9 individual LEDs can be seen.
may I have a code please?
Dang, sounds good! Wonder when it will be back in stock, freeme?
All set to order a green lighting machine...
Hope someone can post kcd #'s. Listings are still dashed out.
Exactly. So damn frustrating that nobody seems to know who makes it or where it’s from.
Was that in the OP all along? Ok, I better go fix me up a nice drink tonight, call it an early evening... 
Don’t feel bad Tom. That happens to me more than I would like to admit.
I'm interested, May I have a coupon please?
I`m interested too !
Replied.
Wanted to try this beast. Any code?
Share
Can I get the code? Seem really a hot buy 
Just ordered a green, thanks for the code
Thank Freeme!
Ive been using mine every night for about the past 2 weeks and find it very practical under a wide range of conditions. Running QB26800 cells, its very impressive for a single emitter light of its size, maintains turbo without stepping down for several minutes (till it become nearly too hot to hold) and throws a usable even blanket of light a reasonably long distance. If anyone is still on the fence, get one and never look back.
The next logical step for Mateminco would be a SFN55.2 version of their MT01 to round out the collection. Maybe you could ask them to consider it and put together another group buy for us.
I’ll second that. That MT01 size, 26800 cell and the SFN55.2 LED would be a really flexible large pocket light. That driver would let me go from sub lumen up to 6200. Should have better throw than the quads in this size.