KC1 keychain light is available now

Oh, no SFT40 available for DM11? I was waiting for that :frowning:

Just ordered a black DM11 with warm white switch and SST-20 deep red emitter :cowboy_hat_face:

Hank, do you have any comparison pictures of the beams from the available B35AM emitters? I’m trying to decide which B35AM to order, but I can’t find much info on them. Are they all 90+ CRI?

Pretty neutral, just a bit on the green side, especially in the spill. Overall it has a very natual, very white look, compared to something like an SST20, but not as pretty as 219b. I like it.

It is not deep carry, and is a clip-on design like d4v2. It’s also black

Yep :slight_smile:

Hank, could you tell lm and Kcd of DM11 with SST20 2700K, please?

Got mine ordered. Grey with amber switch, B35AM 5000k. Thanks Hank!

Does the B35AM led really cost 20$ :open_mouth: or is it because of the driver?

Sorry if I missed this info…

DM11 with CULPM1.TG running on 7 or 8 Amp?

Is the led behind the TIR on the DM11 RGB or mono? Or is it light from the switch getting out the front?

They’re are 6 RGB Aux LED’s behind the optic. Here’s a photo Hank shared earlier in the thread.

The XHP35 HI is also +$20, suggesting it’s mostly the driver. Both of those LEDs cost a bit more in bare form from other sources than an SST-40 though.

Wishing for a better driver for the low volt emitters as well. I would pay 20 USD for a w2 thrower with buck. But as someone said somewhere, it seems hard to source components as it looks like today.

Excellent, sounds great Hank :+1:
I’ll grab one with a DM11

4.24 dollars

But custom MCPCB and i presume time Hank used to work on TIR additionally to make it look good.

Anyone have pictures of all the led switch color options? I used to see it for the D4V2 Ti but hank changed the site no longer has them. I’m assuming it’s the same for the DM11.

Noctigon DM11 1*21700 middle range thrower
Color: Green
Switch back light: Warm white
LED & Tint: B35AM R9080 4000K

ordered. :-) Looking forward to my first B35AM flashlight.

To the DM11 customers, I found a typo.
Instead of writing W2 (CSLPM1.TG), I wrote W2 (CULPM1.TG), just corrected it.
So, it is actually the W2 (CSLPM1.TG) which will be shipped.
Sorry for the mistake.

How does this B35AM led compare to the SST20 in output and throw?

Hi Hank will W1 be an option?

Anyone notice the prototype DM11 green is different from the production unit?