Emisar D3AA is available now

[Valynor]

@Hank Wang

I placed an order for a DM11 two days ago and got confirmation mail + paypal receipt but the "My Orders" account section on your website is still empty ("You have placed no orders").
Is this normal?

[Hank_Wang]

@Valynor

@Hank Wang

I placed an order for a DM11 two days ago and got confirmation mail + paypal receipt but the “My Orders” account section on your website is still empty (“You have placed no orders”).
Is this normal?

It is possible that you did not log into your account to place the order, so, the order does not show in your account.
But it’s no problem for us to ship your order normally.

[anonymous_user]

Is there a recommended battery to get for a DM11 with B35AM? I don’t know if they favor higher amps or if I’m fine getting high capacity 21700 instead.

[Valynor]

Samsung INR21700-50E 4900mAh for highest capacity (I don't think any of the available LEDs for the DM11 will reach 10 amps), Samsung INR21700-40T 4000mAh for best overall performance (+cold weather).

[Rdubya18]

Ordered DM11 B35AM 4500 k. Can’t wait !

[ch1ir]

@thefreeman

@TexasToasted

I think I’m in agreement with this. I have lights that are supposed to be 90+ CRI, but they have a green tint that I don’t like.
I sure would like to see more info on these new B35AM LEDs. Hank showed a picture of the 4000K B35AM showing a nice pink tint. I saw a post on Reddit claiming to be this light with the same 4000K B35AM LED and it looked quite yellow.

@JaredM

3500 and 4500K tints are historically more rosy than 4000k for Nichia. My bet is that the 4000K is neutral duv, maybe even a smidge above BBL. 500K above or below likely is below the BBL though. This isn’t for sure, but a strong pattern I’ve observed over many years here. I’ll say if anybody is worried about yellow or green beams, a 4500K nichia will be your best bet. If you like warm-neutral, 3500K is gorgeous in my experience.

Eurekatronix had color reports from Nichia for their batches, don’t know if Hanks has them too, I ploted them here :

Data (If = 1.4A):

My results of a few I have :

And tint shift vs current :

My results have a lower duv than theirs (considering it’s at 1.4A)

Assuming Hank’s batches are similar, at low current, low CCTs are slightly below the BBL, high CCTs slightly above, but all pretty close overall. High current should bring rosy tints in all of them.

I’m probably going to email hank, but what out of all of Hanks choices would be the rosiest?

[pepinfaxera]

Hello Hank Wang,
How can I see order tracking?

_I enter my account, Order # 1000028997 11/18/2021 Complete,
clik: View Order,
clik: “TRACK YOUR ORDER”
I don’t see a working tracking number.

click: “51875110895362” It doesn’t work.

Clck: http://track.4px.com/old?locale=en_US:
I see: HTTP Status 500 - Request processing failed; nested exception is java.lang.IllegalArgumentException: Locale part “US:” contains invalid characters_

[Hank_Wang]

@pepinfaxera

Hello Hank Wang,
How can I see order tracking?

_I enter my account, Order # 1000028997 11/18/2021 Complete,
clik: View Order,
clik: “TRACK YOUR ORDER”
I don’t see a working tracking number.

click: “51875110895362” It doesn’t work.

Clck: http://track.4px.com/old?locale=en_US:
I see: HTTP Status 500 - Request processing failed; nested exception is java.lang.IllegalArgumentException: Locale part “US:” contains invalid characters_

Please track from here, but for the after sale service, it’s better to send us an email
http://track.4px.com/queryBatch/51875110895362?locale=en_US

[ArtieT59]

@zak.wilson

@Loki

I wondered whether the XHP35 Option is High-CRI. The Zebralight SC64w has it in 80+ (not sure if there are higher options available).

My 3000K K1 purchased last year tests at 83 CRI.

i still have a handful of xhp35 HI 3000k 90CRI from Kaidoman. They are the most nuetral warm white I've seen. They are NOT green, their not necessarily rosy. But they're big advantage is even when comparing them to 219b sw30, they do not look green (sw30 is very rosy). So the xhp35 HI 3000k 90 cri will be going in my dm11. It's a lower output, but awesome tint.

[zak.wilson (Zak)]

@ArtieT59

i still have a handful of xhp35 HI 3000k 90CRI from Kaidoman. They are the most nuetral warm white I’ve seen. They are NOT green, their not necessarily rosy. But they’re big advantage is even when comparing them to 219b sw30, they do not look green (sw30 is very rosy). So the xhp35 HI 3000k 90 cri will be going in my dm11. It’s a lower output, but awesome tint.

Here’s what I tested. X-Rite i1Pro, medium mode, center spot diffused with DC fix.

Flashlight	LED	CCT	Duv	CRI Ra	CRI R9	CRI R12
Noctigon K1	XHP35 HI 3000K	3571	–0.000418	83.2	15.0	67.3

[JaredM]

Looks like a good compromise. I wonder how the output compares to the B35AR amp for amp.

[Pavlo]

@JaredM

Looks like a good compromise. I wonder how the output compares to the B35AR amp for amp.

I am sure xhp35 will be substantially brighter given the low R9 value.

[ArtieT59]

@zak.wilson

@ArtieT59

i still have a handful of xhp35 HI 3000k 90CRI from Kaidoman. They are the most nuetral warm white I've seen. They are NOT green, their not necessarily rosy. But they're big advantage is even when comparing them to 219b sw30, they do not look green (sw30 is very rosy). So the xhp35 HI 3000k 90 cri will be going in my dm11. It's a lower output, but awesome tint.

Here’s what I tested. X-Rite i1Pro, medium mode, center spot diffused with DC fix. table(table#posts). | Flashlight | LED | CCT | Duv | CRI Ra | CRI R9 | CRI R12 | | Noctigon K1 | XHP35 HI 3000K | 3571 | -0.000418 | 83.2 | 15.0 | 67.3 |

thanks for this info!

[JaredM]

@Pavlo

@JaredM

Looks like a good compromise. I wonder how the output compares to the B35AR amp for amp.

I am sure xhp35 will be substantially brighter given the low R9 value.

But it’s also roughly half the die size, so throw will surely be better, but flux might be similar.

[elendur]

@LuxWad

Any news to share on your DM11 review? Take your time! I’m just looking forward to watch it while I wait for my slow shipped-unit.

[edit] @ doesn’t seem to be the right syntax… anyone want to call him out for me?? (Sorry)

[JaredM]

This forum doesn’t support callouts unfortunately (or maybe fortunately)

[LuxWad]

Noctigon DM11 - First Look

It’s not the full review, but here is my first look and impressions of the DM11 (Nichia B35AM 5000K).

The review will take another couple of months or so, I will have to get another with a different LED. I’m not sure which is better, SFT40 or XHP35 HI…

[Lumen9000]

Do you work with commercials? You should work with commercials. I’m sold!

[Tom_E]

Crap! I really want one now... I mean the camera

[carsknivesbeer]

Hank are you going to stock additional DM11 optics on your components page?