Led4power.com : LD-4 CC linear drivers, ILC-0/1 illuminated tailcaps, optics, MOSX, copper DTP MCPCBs...

Gonna check
Thanks

Look for 0402 resistor below uC chip; 75kOhm is 12Amp, 100kOhm 9Amp, 150kOhm 6Amp (or 3 Amp in case large shunt resistor is marked with "002" which is 2mOhm).

@ led4power,
is there an estimate date for shipping of the products bought in December?
I didn’t receive any e-mail with the shipping info, hence my question.
Thanks in advance :+1:

Thanks neven useful information

I was waiting for LD-4 parts to arrive, within couple of days.

Thank you for the reply :wink:
I will wait, no problem at all! :wink:
:beer:

Just wanted to let you know that my stuff has arrived :wink:
Haven’t tested it yet but I trust it is all well :wink:

Thanks again for your work and products :beer: :+1:

Hello L4P, I’m waiting for a delivery from post office, I’ve ordered some leds from you in December,now they seems stuck somewhere in my country,I will try to contact the post office,anything you can do for It? Will let you know how It ends up after some call :person_with_crown:

Other than tracking number, I don't have any more info about package,sorry.

What is the status on the store?

Still closed until further notice.

I don’t know what happened, but I hope that everything is going as well as it can be.

I’m just hoping that there will be a decent torch parts store in Europe again

Same here!

Is there any way to buy an LD-A4 driver?

Only if some member has spare ones and he's wiling to sell them.

What size and what amps are you after? (amps can be adjusted with a resistor swap. But they are tiny.)

LD-A4 7-9A

I think I have a never used 17mm version in the 3 amp type that I don’t need. But I have not unpacked a bunch of workshop offs ‘n’ ends yet so can’t even verify for a bit. It might even be a 6 amp; my memory fails me.

Any updates on new driver types? You had the best CC drivers and I’m looking forward to seeing what you come out with next!

Still too busy with other stuff, sorry.