[May Promotion]VezerLezer ED10 EDC Flashlight -2200LM, 305M, 2nd Batch with improvements.

Commercial Sellers' Spot
23

Good looking edc. Thanks for the GAW.

24

Thanks!

25

Welcome! Nice looking light.

26

OP reflector with sst40? Hmmm. Hopefully you have it in NW not just CW. Looks nice. UI is similar to Thrunites. What kind of driver? For $50+ a buck driver would be nice.

27

Looks nice ! Reminds me a bit of a Wuben in terms of design.

28

I like the styling…especially the tailcap design. A captive deep carry pocket clip would be great.

Best of luck, and thanks for the GAW!!

29

Nice light

30

Good luck with your product launch.

I’m in for trying it.

Thanks.

31

A BLF special edition with 519a 5700k would be nice.

32

Nicely done

Thanks for doing a giveaway .... Brilliant !

33

What does ‘RAMP STYLE SWAP’ means? Kinda several different curves to interpolate ramping? It’s really nice feature, something Anduril (as well as all other UIs with ramping) lacks a lot imo.

I’m NOT in! Just decided to take a look.

34

I’m out, because VezerLezer has kindly sent me an ED10 for review. :beer:

- It has a reflector.

- The battery is a fairly standard button top 18650. I measured slightly over 2600mAh with a Vapcell S4+.

- 3 clicks for strobe. 4 clicks for SOS.

- I haven’t done runtime tests yet. SST40 has been used.

  • What do you mean by throttle? It has a stepped ramp mode with a nice low moonlight (spacing is ok), and a smooth ramp mode without the same moonlight. Smooth ramp is a little fast in the lower levels.

You can switch between stepped and smooth ramp modes by holding the button for 5 seconds from OFF until it flashes.

35

Good luck to everyone!

36

I’m in! Looks like an interesting light!

37

Nice looking light. Magnet in tail?
Thanks for the giveaway!

38

This is similar to sofirn SC31 pro (that has 3 color versions), so price wise would be taught to spend $52.98 for me on it, as I already have sofirn SC31 pro (with addons like 18350 tube, and magnetic tailcap).
overall it looks quite good for EDC flashlight.

- is it constant current driver, hybrid, or FET?
- is there option for magnet in the tail? addon?
- Is there option for better mounted deep carry pocket clip, similar to new KR4 clip? (so that it can't be lost)?

+ 1 for high CRI led option (the SST40 have like only 65 CRI)

Thanks for this GAW VezerLezer

39

Looks interesting, especially like the “spline” knurling (reminiscent of the Zanflare F1).

Sure, I’m in. :laughing:

40

Man that’s a good looking light!

Thanks for the giveaway! :partying_face:

41

Good looking light, seems nicely built.

I suggest you get rid of the 2600mAh 18650 and include a high discharge 3,000mAh cell instead.

42

Wow. Looks very good. I love this.