YouTube Videos

361 posts / 0 new
Last post
jeff51
jeff51's picture
Offline
Last seen: 34 min 55 sec ago
Joined: 03/26/2019 - 17:36
Posts: 1612
Location: Middle of Texas

Sidney Stratton wrote:
Isn’t that a yearly(?) festival where tall ships from many nationalities visit some port, sorta like some antique car shows?

A few decades ago they came to my city. Many people with their crafts would ride alongside. Was quite a sight and the crowds in the port, overwhelming.


That makes sense. Surprised at the number of older looking tall ships. Really nifty.

Can’t really grasp spending years aboard something smaller heading off to parts unknown.
In Scott’s hut in Antarctica, just down the path a bit from the American base at McMurdo,

There are still cans on the wall marked:
“Eatable Tallow Candles”
If it’s dark, ya’ burn ‘em. If you’re hungry ‘ya eat ‘em.
Still a few dead seals stacked in the corner. Freeze dried by now.
They were made of tougher stuff than I.
The men – not the seals….

All the Best,
Jeff

Sidney Stratton
Sidney Stratton's picture
Offline
Last seen: 3 weeks 3 days ago
Joined: 01/28/2018 - 22:59
Posts: 1076
Location: Canada
A 5-year event (Sail Amsterdam ).

Ours was a more modest showing of 38 ships, and back in ’84.

chops728
Offline
Last seen: 2 hours 28 min ago
Joined: 08/30/2014 - 16:00
Posts: 1930
Location: Swampland,La
flightless22
flightless22's picture
Offline
Last seen: 11 hours 41 min ago
Joined: 11/19/2018 - 12:07
Posts: 752
Location: California

https://www.youtube.com/watch?v=tlmC5NJiwoE

Cast Iron pan restoration. They are using freaking laser beams to remove the rust. Big Smile

bobvoeh
bobvoeh's picture
Offline
Last seen: 6 hours 30 min ago
Joined: 09/21/2021 - 23:29
Posts: 405
Location: Florida, United States

flightless22 wrote:
https://www.youtube.com/watch?v=tlmC5NJiwoE

Cast Iron pan restoration. They are using freaking laser beams to remove the rust. Big Smile

That was really cool to watch.

Lightbringer
Lightbringer's picture
Offline
Last seen: 9 hours 50 min ago
Joined: 08/30/2016 - 14:12
Posts: 17551
Location: nyc

I almost yelled at the screen when he left all the laser-marks in/on the pan before just continuing on like nothing.

I restored a coupla cast-Fe pans (still using the small one for eggs practically every time I make ‘em), and while they weren’t so far gone, you don’t just leave ‘em like that.

Wire-brush to get off the main grunge. Steel wool to grind it away ‘til shiny and smooth. Wipe down, wash, wash again, scour, rinse’n‘repeat ‘til it’s perfect. Then season it.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

turkeydance
turkeydance's picture
Offline
Last seen: 14 hours 10 min ago
Joined: 02/20/2020 - 18:53
Posts: 1696
kennybobby
kennybobby's picture
Offline
Last seen: 6 days 10 hours ago
Joined: 05/10/2017 - 09:13
Posts: 1300
Location: huntspatch, alabama

+1 for the ice-cold beer and nuts.

Now i used to think that i was cool,
drivin' around on fossil fuel,
until i saw what i was doin',
was drivin' down the road to ruin. --JT

Sidney Stratton
Sidney Stratton's picture
Offline
Last seen: 3 weeks 3 days ago
Joined: 01/28/2018 - 22:59
Posts: 1076
Location: Canada

Alcohol-induced idiocy.

bobvoeh
bobvoeh's picture
Offline
Last seen: 6 hours 30 min ago
Joined: 09/21/2021 - 23:29
Posts: 405
Location: Florida, United States

Sidney Stratton wrote:
Alcohol-induced idiocy.

Wonder what kind of flashlight he used?

Lightbringer
Lightbringer's picture
Offline
Last seen: 9 hours 50 min ago
Joined: 08/30/2016 - 14:12
Posts: 17551
Location: nyc

Damn, must use the alcohol as antifreeze…

He dead? I keep seeing comments he dead. Uh-oh.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

bobvoeh
bobvoeh's picture
Offline
Last seen: 6 hours 30 min ago
Joined: 09/21/2021 - 23:29
Posts: 405
Location: Florida, United States

Lightbringer wrote:
Damn, must use the alcohol as antifreeze…

He dead? I keep seeing comments he dead. Uh-oh.

No kidding. I read he was found dead at that same lake just recently. RIP.

edit…. Died November 27 2021 while filming a video for youtube.
Apetor Wikipedia

Correllux
Correllux's picture
Offline
Last seen: 23 hours 18 min ago
Joined: 04/27/2019 - 22:23
Posts: 1590
Location: USA
Lightbringer
Lightbringer's picture
Offline
Last seen: 9 hours 50 min ago
Joined: 08/30/2016 - 14:12
Posts: 17551
Location: nyc
bobvoeh wrote:
Died November 27 2021 while filming a video for youtube.

Yeesh. Like that Choinese fella who used to hang off the edges of buildings for lulz. Had “sponsorships” so he could pay for his mum’s medical expenses or something.

Anyway, one day he just couldn’t hold his grip, couldn’t climb back up, and dropped off the side of a building. Didn’t go splat way down on the sidewalk, but like 5 stories below where he landed on a wider section of the building.

Only vague recall, can’t remember details…

There’s that dope who rides his hoverboard just inches away from the edges of building-roofs that we’ll one day read about, too.

Ah, here we go…

We’re polishing up the Darwin Award, just to be prepared.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

bobvoeh
bobvoeh's picture
Offline
Last seen: 6 hours 30 min ago
Joined: 09/21/2021 - 23:29
Posts: 405
Location: Florida, United States
Lightbringer wrote:
bobvoeh wrote:
Died November 27 2021 while filming a video for youtube.

Yeesh. Like that Choinese fella who used to hang off the edges of buildings for lulz. Had “sponsorships” so he could pay for his mum’s medical expenses or something.

Anyway, one day he just couldn’t hold his grip, couldn’t climb back up, and dropped off the side of a building. Didn’t go splat way down on the sidewalk, but like 5 stories below where he landed on a wider section of the building.

Only vague recall, can’t remember details…

There’s that dope who rides his hoverboard just inches away from the edges of building-roofs that we’ll one day read about, too.

Ah, here we go…

We’re polishing up the Darwin Award, just to be prepared.

Yep, we will be reading about him one day.

kennybobby
kennybobby's picture
Offline
Last seen: 6 days 10 hours ago
Joined: 05/10/2017 - 09:13
Posts: 1300
Location: huntspatch, alabama

bobvoeh wrote:
Lightbringer wrote:
Damn, must use the alcohol as antifreeze…

He dead? I keep seeing comments he dead. Uh-oh.

No kidding. I read he was found dead at that same lake just recently. RIP.

edit…. Died November 27 2021 while filming a video for youtube.
Apetor Wikipedia

What could possibly go wrong when swimming under the ice while wearing hockey skates after drinking mass quantities of vodka?

Now i used to think that i was cool,
drivin' around on fossil fuel,
until i saw what i was doin',
was drivin' down the road to ruin. --JT

CRC2
Offline
Last seen: 3 weeks 1 day ago
Joined: 03/27/2022 - 17:32
Posts: 310
Location: Canada

I don’t typically watch these YouTube shorts, but as a big fan of GITD the title caught my attention. I also thought it was total BS.

I tried it myself using a flashlight. It works!

KeepingItLight
KeepingItLight's picture
Offline
Last seen: 14 hours 22 min ago
Joined: 06/15/2015 - 14:52
Posts: 965
Location: California

Kid brother opens up a can o' whoop ass!

NeutralFan
NeutralFan's picture
Offline
Last seen: 2 days 11 hours ago
Joined: 03/20/2014 - 19:22
Posts: 1982
Location: Wisconsin, USA

CRC2 wrote:

I don’t typically watch these YouTube shorts, but as a big fan of GITD the title caught my attention. I also thought it was total BS.

I tried it myself using a flashlight. It works!

Confirmed with my UV flashlight too. Thought maybe it was specific to a type of peanut butter, but it also worked on the all natural stuff which is just peanuts and salt. Strange!

I’d rather use my flashlight around the house than turn on the lights.

Correllux
Correllux's picture
Offline
Last seen: 23 hours 18 min ago
Joined: 04/27/2019 - 22:23
Posts: 1590
Location: USA

NeutralFan wrote:
CRC2 wrote:

I don’t typically watch these YouTube shorts, but as a big fan of GITD the title caught my attention. I also thought it was total BS.

I tried it myself using a flashlight. It works!

Confirmed with my UV flashlight too. Thought maybe it was specific to a type of peanut butter, but it also worked on the all natural stuff which is just peanuts and salt. Strange!

Well now that’s just weird! I thought maybe it was the plastic jar but no, the peanut butter does it on its own. Just poked a Nichia in a jar and it does get that glow. Says peanuts, salt, palm oil, and sugar on the label. I wonder if it’s something in the peanuts, since NeutralFan’s doesn’t have the oil, which was my first thought.

How odd.

bobvoeh
bobvoeh's picture
Offline
Last seen: 6 hours 30 min ago
Joined: 09/21/2021 - 23:29
Posts: 405
Location: Florida, United States

I tried it with my Weltool M2-BF, lights it right up. Like someone else said, I have the Jiff Natural and it works.

Sidney Stratton
Sidney Stratton's picture
Offline
Last seen: 3 weeks 3 days ago
Joined: 01/28/2018 - 22:59
Posts: 1076
Location: Canada

No such fluorescence here – generic PB & Kraft All Natural. Seoul Viosys CUN66A w/ZWB2.

CRC2
Offline
Last seen: 3 weeks 1 day ago
Joined: 03/27/2022 - 17:32
Posts: 310
Location: Canada

I just happened to have the same peanut butter as in the video.
I used my Manker MC13 that I regularly use to blast all my GITD stuff.
Couldnt believe it worked.

Side note. JIF is the only good peanut butter.
And their “dark roast” one is even better.

KeepingItLight
KeepingItLight's picture
Offline
Last seen: 14 hours 22 min ago
Joined: 06/15/2015 - 14:52
Posts: 965
Location: California

turkeydance
turkeydance's picture
Offline
Last seen: 14 hours 10 min ago
Joined: 02/20/2020 - 18:53
Posts: 1696
Lightbringer
Lightbringer's picture
Offline
Last seen: 9 hours 50 min ago
Joined: 08/30/2016 - 14:12
Posts: 17551
Location: nyc
turkeydance wrote:

Good thing that bike didn’t have a headlight…

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

kennybobby
kennybobby's picture
Offline
Last seen: 6 days 10 hours ago
Joined: 05/10/2017 - 09:13
Posts: 1300
Location: huntspatch, alabama

Amazing “mechanic” Lin Guoer, an engineer living in a mountain village, rewinds generators, repairs diesel motors, carpenter, welder, entertaining videos

Now i used to think that i was cool,
drivin' around on fossil fuel,
until i saw what i was doin',
was drivin' down the road to ruin. --JT

RichH
Offline
Last seen: 1 week 2 days ago
Joined: 07/26/2018 - 02:29
Posts: 279
Location: UK

CRC2 wrote:

I don’t typically watch these YouTube shorts, but as a big fan of GITD the title caught my attention. I also thought it was total BS.

I tried it myself using a flashlight. It works!

Styropyro is well worth a look, he does some awesome laser mods.

South Saxon

Lightbringer
Lightbringer's picture
Offline
Last seen: 9 hours 50 min ago
Joined: 08/30/2016 - 14:12
Posts: 17551
Location: nyc

Great channel, watching him is a hoot!

Makes throwing spikes, trench flails, you name it.

09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0

kennybobby
kennybobby's picture
Offline
Last seen: 6 days 10 hours ago
Joined: 05/10/2017 - 09:13
Posts: 1300
Location: huntspatch, alabama

No rebar was harmed (or used) in the making of the blade.

Now i used to think that i was cool,
drivin' around on fossil fuel,
until i saw what i was doin',
was drivin' down the road to ruin. --JT

Pages