【Brass on Sale】Wurkkos TS10 "slender waist" 14500 triple LEDs Light with Anduril 2.0

1352 posts / 0 new
Last post
Verodin
Offline
Last seen: 3 weeks 1 day ago
Joined: 01/11/2022 - 16:50
Posts: 585

LumenFanBoy wrote:
Huh. that’s very sparce info on emitters. Mentions CRI but not CCT. Won’t even say anything besides CSP, whatever that is. Looks like it won’t be a favourite for modding then, for those of us who wanted to mod it with 519A’s or the like. I was expecting something along the lines of 219C’s or LH351D’s, so these 2323 emitters are certainly a surprise

Noticed the same thing. They seem reluctant to give any details. With CSP emitters, modding potential gets greatly reduced. Upside is that my bankaccount will go up, as instead of buying a handful I’ll (probably, depending on CCT) only buy 1 and take a wait and see stance.

I’d really like to know CCT as well.

mattlward
mattlward's picture
Offline
Last seen: 1 week 6 days ago
Joined: 06/19/2015 - 09:20
Posts: 3451
Location: Illinois, USA

The only real reason CSP emitters will affect the modding options is due to the fact that you will have to find an MCPCB that fits the light and your led of choice. I would assume that would be a 3535 led.

EDC rotation:
KR4, SST-20 FA3 4000k (favorite!)
FW3A, Nichia 4000k sw40 r9080 (second favorite)
FW1A, LH351D 3500k (third favorite)
FW1A, XP-L Hi 3A
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
Emisar D4V2, brass E21A 3500k (night light of choice)

jon_slider
jon_slider's picture
Offline
Last seen: 9 hours 29 min ago
Joined: 09/08/2015 - 12:20
Posts: 6480
Location: Central North America

mattlward wrote:
an MCPCB that fits the light
does it fit a “standard” 20mm triple?
Sudsy
Offline
Last seen: 1 hour 31 min ago
Joined: 04/05/2019 - 00:37
Posts: 71

Does anyone know if a battery will be included? I’m wondering if I’ll need button top or flat top…

Shimshamtymamm
Offline
Last seen: 2 hours 33 min ago
Joined: 05/13/2022 - 16:14
Posts: 56
Location: Alaska

From what ive seen you can order it with and without a battery.

Verodin
Offline
Last seen: 3 weeks 1 day ago
Joined: 01/11/2022 - 16:50
Posts: 585

@Wurkkos
According to the announcement this light will be available in a few hours. Ignore our modding nitpicking details for a moment and at least tell us the CCT. It’s an essential basic detail of a flashlight. Thank you.

jon_slider
jon_slider's picture
Offline
Last seen: 9 hours 29 min ago
Joined: 09/08/2015 - 12:20
Posts: 6480
Location: Central North America

It looks like Cool Blue in this prototype video:

Sudsy
Offline
Last seen: 1 hour 31 min ago
Joined: 04/05/2019 - 00:37
Posts: 71

I keep hoping that CCT options will be added to the sale page when the listing goes live. We still need to be able to chose our aux color there, right? Maybe we’ll get both.. I’m hoping.

3oni
3oni's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: 09/28/2016 - 18:12
Posts: 17
Location: Seattle, WA

That’s weird, like half the time in that video it looks notably cool and blue, and the other half it’s more neutral. I wonder if the camera’s white balance was acting up while shooting it?

Whatever the case, I’d love to know more about the emitters and the specific type of 14500 required (e.g. 10A high-drain). It looks like a nifty little light!

"Hold tight and pretend it's a plan!” -- The Doctor / / / EDC: ZebraLight SC64c LE (LH351D 4000K CRI 90) or Malkoff MDC 16650 (SST-20 4000K CRI 95)

3oni
3oni's picture
Offline
Last seen: 3 weeks 1 day ago
Joined: 09/28/2016 - 18:12
Posts: 17
Location: Seattle, WA

Welp, guess I’ll find out — they just went live and I picked one up. Smile

Options are no battery for $20, with a battery for $22, and red, orange, or ice blue aux LEDs. I was signed in, so that may be a “member” price, and there was a coupon on the site for 10% (which worked). Shipping to the US was free.

I’ve been very happy with my $9 Wurkkos penlight. For $20 this looks like a neat light and a good gamble.

"Hold tight and pretend it's a plan!” -- The Doctor / / / EDC: ZebraLight SC64c LE (LH351D 4000K CRI 90) or Malkoff MDC 16650 (SST-20 4000K CRI 95)

goodbyegalaxy
Offline
Last seen: 1 week 6 days ago
Joined: 01/08/2022 - 18:49
Posts: 14

Wurkkos wrote:
“slender waist” Wurkkos TS10 14500 Light first batch will release on 5th,June, PST 6PM (which is our working time 6th,June 9 AM-Beijing time)

First batch with single color aux led orange/red/ice blue for choice at price $19.99, if you are a member of wurkkos.com,

10% member code could be used at the same time-WKMB88

Seems to be live now! The coupon code you mention here is invalid though.

Edit: never mind, I got logged out and you have to be logged in otherwise it says the code doesn’t exist.

MoreHiCRILumens
MoreHiCRILumens's picture
Online
Last seen: 4 min 41 sec ago
Joined: 10/25/2019 - 07:08
Posts: 1959
Location: Finland

Ordered one with red auxes and also got HD15R with red body and silicone glow ring. Only like 45€ and two new lights. Thumbs Up

Plasmatoast
Offline
Last seen: 44 min 29 sec ago
Joined: 04/08/2021 - 18:35
Posts: 161
Location: Maine, USA

Code worked. Ordered one also.

Sudsy
Offline
Last seen: 1 hour 31 min ago
Joined: 04/05/2019 - 00:37
Posts: 71

I ordered one blue and one orange. The member code worked for me. Let’s see what we get, everyone

Neb_77
Offline
Last seen: 7 hours 49 min ago
Joined: 09/10/2020 - 22:25
Posts: 33
Location: Ohio

Ordered the orange aux. the code worked for me. Even not knowing the tint, for $20 it’s likely a good light for the money.

Firelight2
Firelight2's picture
Offline
Last seen: 14 hours 18 min ago
Joined: 04/08/2011 - 15:17
Posts: 5071
Location: California

Order placed for 1 with ice-blue aux leds.

Make sure to use the discount code at the top of the Wurkkos page for an extra 10% off. Came to $18 with free shipping. Not bad for an Anduril2 triple, even if it turns out to have really bad color temp or tint.

Even if it turns out to be a worse light than the FWAA, it’s less than half the price!

86250rrippin
86250rrippin's picture
Offline
Last seen: 1 week 2 days ago
Joined: 04/13/2020 - 22:45
Posts: 51
Location: Western , PA USA

Got one with red and one with orange aux led’s. Already have a FF PL47V2 with ice blue. Looking forward to getting these neat lil lights.

Lots of lights ........................

mattlward
mattlward's picture
Offline
Last seen: 1 week 6 days ago
Joined: 06/19/2015 - 09:20
Posts: 3451
Location: Illinois, USA

One on the way with red aux. Hope it comes in under 6000k.

EDC rotation:
KR4, SST-20 FA3 4000k (favorite!)
FW3A, Nichia 4000k sw40 r9080 (second favorite)
FW1A, LH351D 3500k (third favorite)
FW1A, XP-L Hi 3A
FW3A, LH351D 3500k
FW3A, SST20 FD2 4000k
FW3A, Cree XP-L Hi 5A3
Emisar D4V2, SST20 4000k
Emisar D4V2, brass E21A 3500k (night light of choice)

Correllux
Correllux's picture
Offline
Last seen: 2 days 20 hours ago
Joined: 04/27/2019 - 22:23
Posts: 1579
Location: USA

I bought one, too…a little hesitation with so little information provided and no pre-sale test reviews, but so far Wurkkos has done a pretty good job. Looking forward to it!

Correllux
Correllux's picture
Offline
Last seen: 2 days 20 hours ago
Joined: 04/27/2019 - 22:23
Posts: 1579
Location: USA

Wurkkos…..a kind note. Toykeeper has allowed the Anduril and other firmware to be used free of charge with an open source license, but there are some easy requirements that she asks for manufacturers to follow. Product listings are supposed to include clear and prominent mention of the developer’s name and a link to the source code. I don’t see that in your listing for this light on your website or on the Aliexpress listing. It should be added. Smile

It’s wonderful that they offer this to the community and to manufacturers for free! Can you imagine what the licensing cost would be if she charged for her thousands of hours of development time?? All she asks is for fair recognition of her work. Would be kind to see the information listed since it is a gift to us all.

nicodimus22
Offline
Last seen: 7 hours 13 min ago
Joined: 05/02/2022 - 23:11
Posts: 112
Location: Maryland

I’ll wait for reviews to come in. At this point, I’m much too picky about tint and CRI to order anything blindly.

手电筒
Offline
Last seen: 3 days 14 hours ago
Joined: 05/07/2022 - 15:47
Posts: 10

Patiently waiting for AA compatible version.

Wurkkos
Wurkkos's picture
Offline
Last seen: 51 min 41 sec ago
Joined: 05/28/2019 - 05:14
Posts: 910
Verodin wrote:
@Wurkkos According to the announcement this light will be available in a few hours. Ignore our modding nitpicking details for a moment and at least tell us the CCT. It’s an essential basic detail of a flashlight. Thank you.

the main LED is CSP 6000-6500K and with >90 CRI tint

Wurkkos
Wurkkos's picture
Offline
Last seen: 51 min 41 sec ago
Joined: 05/28/2019 - 05:14
Posts: 910

Correllux wrote:
Wurkkos…..a kind note. Toykeeper has allowed the Anduril and other firmware to be used free of charge with an open source license, but there are some easy requirements that she asks for manufacturers to follow. Product listings are supposed to include clear and prominent mention of the developer’s name and a link to the source code. I don’t see that in your listing for this light on your website or on the Aliexpress listing. It should be added. Smile

It’s wonderful that they offer this to the community and to manufacturers for free! Can you imagine what the licensing cost would be if she charged for her thousands of hours of development time?? All she asks is for fair recognition of her work. Would be kind to see the information listed since it is a gift to us all.

Thanks for the reminder, I’ll add it right now

Gunga
Gunga's picture
Offline
Last seen: 2 hours 14 min ago
Joined: 11/28/2014 - 16:56
Posts: 2144
Location: Vancouver, Canada

I’m glad I waited. I’m too picky to do cool white and the footprint does not lend itself to the usual Nichia swap.

Verodin
Offline
Last seen: 3 weeks 1 day ago
Joined: 01/11/2022 - 16:50
Posts: 585

Gunga wrote:
I’m glad I waited. I’m too picky to do cool white and the footprint does not lend itself to the usual Nichia swap.

Same here, but curiosity got the better of me. How often do you see a high CRI cool white light? Also want to try to swap the mcpcb if needed. All depends on size. Or maybe Nichia E21As fit on the 2323 footprint. But that’s a gamble.
lotari
Offline
Last seen: 15 min 54 sec ago
Joined: 02/22/2018 - 17:47
Posts: 23
Location: Finland

Great to see the TS10 finally available!

Wurkkos wrote:

the main LED is CSP 6000-6500K and with >90 CRI tint

What plans are there for the next batch? 6000-6500K is quite cold for many and may hinder sales, even if it’s >90 CRI.

  • If it uses the same CSP as the LT1S, for sure you will offer the TS10 with 2700K >90 CRI?
  • What about mixes? 1× 2700k, 2× 6500k, or 2× 2700 + 1× 6500k? Rosy..
  • Any non-LT1S CCTs planned? 4000k, 5000k?
  • For the DIY-minded, Wurkkos could sell the CSP emitters though the website.. Low-effort way to make the initial batch more interesting for some.
zoulas
zoulas's picture
Offline
Last seen: 2 hours 2 min ago
Joined: 06/01/2020 - 08:35
Posts: 2439

This light is a winner. Nice job with the design and price point.

jon_slider
jon_slider's picture
Offline
Last seen: 9 hours 29 min ago
Joined: 09/08/2015 - 12:20
Posts: 6480
Location: Central North America

Wurkkos wrote:
the main LED is CSP 6000-6500K and with >90 CRI tint
Good Morning, Congratulations on your release.
I also sent you a private message.
Correllux
Correllux's picture
Offline
Last seen: 2 days 20 hours ago
Joined: 04/27/2019 - 22:23
Posts: 1579
Location: USA

Wurkkos wrote:
Correllux wrote:
Wurkkos…..a kind note. Toykeeper has allowed the Anduril and other firmware to be used free of charge with an open source license, but there are some easy requirements that she asks for manufacturers to follow. Product listings are supposed to include clear and prominent mention of the developer’s name and a link to the source code. I don’t see that in your listing for this light on your website or on the Aliexpress listing. It should be added. Smile

It’s wonderful that they offer this to the community and to manufacturers for free! Can you imagine what the licensing cost would be if she charged for her thousands of hours of development time?? All she asks is for fair recognition of her work. Would be kind to see the information listed since it is a gift to us all.

Thanks for the reminder, I’ll add it right now

Awesome! That was quick and I’m sure she’ll appreciate that!

Do you know if the Ali store will have stock soon?

Pages