【TS10V2 Al available】Wurkkos "slender waist" TS10v2 aluminum version available with black,green,orange

[Wurkkos]

@UVChemist

@Wurkkos

@lotari

Great to see the TS10 finally available!

@Wurkkos

the main LED is CSP 6000-6500K and with >90 CRI tint

What plans are there for the next batch? 6000-6500K is quite cold for many and may hinder sales, even if it’s >90 CRI.

• If it uses the same CSP as the LT1S, for sure you will offer the TS10 with 2700K >90 CRI?
• What about mixes? 1x 2700k, 2x 6500k, or 2x 2700 + 1x 6500k? Rosy…
• Any non-LT1S CCTs planned? 4000k, 5000k?
• For the DIY-minded, Wurkkos could sell the CSP emitters though the website… Low-effort way to make the initial batch more interesting for some.

yes, we are planing use 4000K 5000K in following production, CSP emitters now only have some 2700K in stock, we will update on the website

Any estimate on when those other CCT options will be available? Also Ice Blue and Orange sold out, I shouldn’t have waited lol

OPS, sorry when going to update the 2700K CCT, i found it was 1919 size, so have to wait next batch of other CCT options

[Unheard]

@id30209

I just got a word with Clemence (ERKX), showed him the emitter datasheet and he said it could be a straight Nichia E21A swap. Not 100% sure because i don’t have it on hands but soon (hopefully) i’ll report back with some mod update.

Thanks!

Good luck with the mod. I’ve swapped the TX in an i3E. One hit and one miss. Three tiny LEDs at a time will be very difficult I guess.

[Wurkkos]

10 more blue color release from the unpaid orders.

[Catnap]

@BlueSwordM

So, this light uses a buck driver, right?

I’m pretty sure it’s linear. 14500 only.

[ROYCE]

@RavenII

@~~ROYCE~~

Orange with a battery seems to be in stock still. Orange without a battery is out of stock along with both options with ice blue aux. Even if you don’t need the battery, it’s only 2 bucks.

On their site? I see Orange and Ice Blue as being out of stock no matter which options are selected.

It was definitely listed as in stock when I checked yesterday, but no longer. Blue is back though.

[ROYCE]

Does anyone know if this light requires a flattop/button top cell? Or if either will work just as well?

[Auxilshunter]

my understanding is both will work!

[supergron]

sold out?

[iamlucky13]

@RavenII

So my house was robbed last week and they took my KR4…I came on here looking to find a reasonable replacement and sure enough, here it is…but it looks like I missed out on the Orange one. Any ETA on a new batch?

I can solder very well, what size are the aux LEDs?

Sorry to hear that. They apparently knew a quality flashlight when they saw it though.

Do be aware that this is a smaller light than the KR4, running on a 14500 battery instead of an 18650. It should be a great pocket light at a very nice price, but the maximum brightness won’t be as impressive.

[RavenII]

I appreciate it…apparently they knew what quality pistols (Dan Wesson), a display case full of ST Dupont lighters, and a whole bunch of other stuff were.

Yeah, I currently carry a Wowtac W1 (Thrunite T1) modded with a LH351D (4?K…I think). It’s nice, but wouldn’t mind something with anduril. The KR4 was only 2k/lm I believe. I ended up ordering the Red aux one so I don’t miss out. I can always change them if needed.

[Wurkkos]

Thank you for all support , the first batch sold out already,
so what body color and aux color you expect for next batch?

[Skylight]

I would prefer cyan and green as body colors.

[Geuzzz]

Olive drab

[ArtieT59]

man! I missed the drop already? I checked on the 6th and it wasn't for sale, and now its sold out of every color.. disappointing..

Next batch - red anodization and orange auxiliaries please. or any ano color with orange auxiliaries.

i have put orange aux in a red ff e07 it was the best looking combo i have seen.

[Wurkkos]

Raw aluminum and silver Oxidation, which is better?

[ArtieT59]

@Wurkkos

Raw aluminum and silver Oxidation, which is better?

raw aluminum, in my opinion.

[trakcon]

I’d really like to see a batch with 3535 footprint LEDs, or maybe just suitable 3535 mcpcbs available for modding.

[Sudsy]

I like raw aluminum

[Auxilshunter]

Raw aluminum. It looks great and will help the auxil colors stand out.

Thanks for asking us!!

Seth

[darosk]

Olive green please.