Guys, any one has manual for this LT mini? i cant seem to enter into Blinkies and Strobes mode unlike the LT 1.
Click 10x from off and hold the last click to ensure you’re not stuck in the simple UI, then try again. 3 clicks from off enters battery check on mine, just like full size. 3 clicks from off and hold the last one enters the strobe group on mine, just like the full size.
am interested for one please
Thanks much Grizzly! managed to get the manual from Barry.
Sorry for the manual was not included in the package.
click here to check out the LT1-Mini Manual PDF file.
Does anyone know if there’s a review video yet ?
My order is about 2.5 hours away now, but it might take until Monday to receive it, lol.
Remember Monday is a holiday. So maybe Tue?
Very well done
Just recurved received mine , is very nice!
A big thanks to everyone involved for their efforts!
I finally found a magnet that works really well. D83-N52 from KJmagnetics.
For installation, just stretch the spring out a bit with some pliers. Be careful not to pull it out of its socket. If you do, it’s a little hard to get back in but it can be done. Then, just slide the magnet through the side of the spring and it will stay in place underneath it.
This setup is plenty strong and it can reliably hold LT1 Mini up on vertical surfaces.
I’m hoping some 3d’s a neat base for this and maybe glue a magnet into that
That gives me an idea. I could 3D print a wider base for my LT1 Mini, embed a magnet into it, and then use that magnet + the magnet in the tailcap to hold the wider base on.
If possible, print the base so that it can be stored atop the head when not in use. Like an inset ring on the bottom of the printed base that seats onto ring protruding from the top of the head.
Arrived today, so I ducked that problem. This light will get a lot of use! Thanks again to the team
My mini’s arrived today. Excellent little lantern.
I am very pleased.
There was a seller on eBay that sold base for the LT1, maybe he’ll make some for the mini. Very reasonable price.
Light arrived, looks nice. Guess I’ll have to break out the 3d printer and laptop to see if I can design a wider base for it, if no one else hasn’t designed one yet.