The 10th Annual Old Lumens challenge - has officially concluded! Winners have been announced!

The 10th Annual Old Lumens challenge!


CONTEST DURATION:

This years contest officially starts as of today, July 22nd 2022, and runs until October 31st 2022, for a total duration of 101 Days.

https://free.timeanddate.com/countdown/i8f9uv1z/n4365/cf100/cm0/cu4/ct0/cs1/ca0/co1/cr0/ss0/cac000/cpc000/pcfff/tc09f/fs150/szw320/szh135/tatTIME%20REMAINING/tac000/tptTime%20since%20Event%20started%20in/tpc000/iso2022-11-01T00:00:00

WHAT IS THE OLD LUMENS CHALLENGE?

This is a contest which challenges BLFers to build a lighting device from scratch! All skill levels are welcome! A "modified light" category was added for the 7th annual challenge and it remains as a category in this year's challenge.
For the history of this contest, and to view all previous contest threads and entries, check out the Old Lumens BLF Contest Archive 2013 - 2021.


CONTEST RULES:

You may enter a single build into one of the following three categories: (You are allowed to change categories during the contest if you wish)

  • Hand Made (Basic Tools)

Your light must be made from scratch.
You must make a build thread, show images, and explain the build as it progresses towards completion.
No outside services are allowed.
Entries should be portable and battery operated.

All small hand tools are acceptable, as well as these power tools:
Soldering irons and other heating equipment
Electric drill / drill press
Dremel style rotary tool
Electric saws
Disc or belt sander

You may use some manufactured flashlight components: reflectors and other optics, drivers, LEDs and MCPCBs, O-rings, centering rings, springs, switches, switch boots, and pocket clips.
You may use any PCB whether you designed it or not, and you may acquire it from Osh Park or elsewhere.
You may use any firmware or code whether you wrote it or not.
You may not use manufactured flashlight parts such as a bezel, head, pill or drop-ins, body, or tail cap.
All kinds of raw materials can be used: sheet metal, wire, tubing and pipe, metal and plastic containers, bottles and jars, extrusions, wood, plastics, fabrics, epoxy, glass, stone, leather, rubber, etc.

  • Machine Made (Advanced Tools)

Your light must be made from scratch.
You must make a build thread, show images, and explain the build as it progresses towards completion.
No outside services are allowed.
Entries should be portable and battery operated.

All manually operated and computer controlled machine tools are allowed, such as:
Lathes
Milling Machines
3D Printers
As well as all hand tools and other fabrication equipment.

You may use some manufactured flashlight components: reflectors and other optics, drivers, LEDs and MCPCBs, O-rings, centering rings, springs, switches, switch boots, and pocket clips.
You may use any PCB whether you designed it or not, and you may acquire it from Osh Park or elsewhere.
You may use any firmware or code whether you wrote it or not.
You may not use manufactured flashlight parts such as a bezel, head, pill or drop-ins, body, or tail cap.
All kinds of raw materials can be used: sheet metal, wire, tubing and pipe, metal and plastic containers, bottles and jars, extrusions, wood, plastics, fabrics, epoxy, glass, stone, leather, rubber, etc.

  • Modified Light: (Anything Goes!)

You must show us something that was modified by you and how it was done.
You can make a new thread or link to a mod you have posted on BLF within the stated time frame of the contest.
You can build or modify by any means at your disposal and your mod can also be some form of self built flashlight attachment(s), clips, lanyards, paracord wraps, pouch, or other related paraphernalia.
If your build breaks the rules of the other categories, you may enter it in this category.

HOW TO ENTER:

Create an aptly titled build thread in the Giveaways and Contests forum category.
Please include your username, the name of the contest, and which category you are entering. (You may change categories as you wish.)
Reply to this thread with the link so that the organizers can add your build to the list of entries.
Links to mods may also be entered by replying to this thread.

All entries will be listed in post #2 of this thread.

QUESTIONS, COMMENTS, AND CONCERNS:

Feel free to reply to this thread. If you wish for a private exchange, please PM The_OL_Contest account.


JUDGES:

Contest organizers will solicit BLF members in order to find judges. The identities of the judges are not revealed.


JUDGING CRITERIA:

Up to 10 points are awarded in each of the following five categories:

  • Skill Level / Build Quality: Judged with consideration to the person's access to tools, materials and abilities. Is the finished build functional & looking good? Was it difficult to make? Was the craftsmanship top notch with the tools used?
  • Uniqueness / Inventiveness / Innovation: Is the light unique, one of a kind, or does it operate in a special way? Can something similar be readily purchased? Were new technical innovations introduced? Were new firmware, drivers, or PCBs created?
  • Build Thread Quality: Did the contestant do a good job of showing and explaining the steps involved in the build? Were the difficulties encountered along the way documented and resolved? Was it easy to follow along?
  • Shown Operational: Did the contestant show the light operating, describe its functions, take beam shots, videos, etc.?
  • Subjective Evaluation / Bonus Points: The judge may assign these points at their discretion. Did something particularly impress or stand out to the judge? Did the contestant give it their best shot? Did they show enthusiasm for the contest?


PEOPLE'S CHOICE AWARDS:

There's more than one way to win! In addition to the official judgement, a thread will be created which contains a poll, and the BLF community will vote for their favorite build. This poll will run for fourteen days. Contest participants may vote for other entrants but not for themselves.


PRIZE SELECTION:

Winner of the Hand Made category has 1st choice of prize, followed by winner of the Machine Made category, followed by winner of the Modified Light category.
Runner up of the Hand Made category has the 4th choice of prize, followed by runner up of the Machine Made category, followed by runner up of the Modified Light category. Prize selection will continue in this way as long as any prizes are left to award.
A special prize will be awarded to the winner of the people's choice awards.

SPONSORS AND PRIZES:

On behalf of the BLF community, THANK YOU for your generosity!

ReyLight has offered a Brass Pineapple. Thanks Rey! Who can resist some Nichia 219B SW45K R9080 goodness?

LiionWholesale is offering a prize of any four Liion Wholesale brand batteries along with any 4 bay charger. Wow! That is sure to keep your lights going strong!

COUNTYCOMM has offered a $200 store credit for one lucky winner, as well as a another for $50! Aren't we spoiled!?

CONVOY is offering a choice of any flashlight from the Convoy store. And with such a great selection of lights these days, you'll have a smile on your face in no time!

TASKLED has offered a choice of any two drivers for one lucky winner. Check out their new ULTRABOOST driver for some serious power delivery! 225 WATTS!

SKYLUMEN is offering a Sky Lumen XXI #033 with custom options, OR, a mystery light! You'll have warm hands this winter.

Hoop has offered three custom Mag "shorty" builds, as described in this post.


This year's contest organizer is Hoop, who would like to extend a thank you to MtnDon and everydaysurvivalgear for their counsel, and to all of the other organizers of the contest in previous years, who's efforts have made it easier to succeed them.

This year’s builds:

Hand Made category:

Machine Made category:

Modified Light category:

Congratulations to everyone who completed this year’s challenge.

This year’s challenge winners are:

Hand Made Category

Machine made category

No completed entries this year.

Modified Light Category

YuvalS gets first choice of prize, followed by Skylight, next MtnDon, next The Whispering Gallery, and so on. PMs incoming!

Here’s a group photo of this year’s builds:

Thanks again to all participants, judges, and sponsors, for helping to make this year’s event a success!

1 Thank

I made a thread, not much to see yet.

Edit: I have withdrawn my entry.

I hope to add my name and a challenge topic but have a couple of things I must complete first.

I’ve been mulling over what to do for this year. I’m most definitely going for a lantern but I’ve yet to determine exactly HOW I’d be going for it.

This year is a good one for DIY builds. With the exception of the “chip shortage,” there are more component options than ever before. There are also more flashlights and hosts than ever before.

Convoy is now offering a lot of drivers and LEDs, and also a selection of optics. KaiDomain has lots of LEDs, drivers, reflectors, glass windows, and other optics. There are also lots of shared BLF projects on Osh Park, for your PCB needs. TaskLed new Ultraboost driver is a real powerhouse.

Creating your own PCBs is pretty easy to do with DipTrace, which is available for free. Their short PDF tutorial is easy to follow and you’ll be making boards in no time.

If you can’t get your raw materials locally at a metal or plastics distibutor, or hardware store, there are lots of places online to get these things. McMaster-Carr has a huge selection of hardware and materials, they are a prototype supply store! There are also a lot of online metal stores these days.

For electronic components, there’s always Digi-Key and Mouser, among others. Octopart is helpful for finding available stock of the components you need.

If you need help finding supplies, just ask! Myself or someone else will probably know where to get it.

Best wishes to the participants, and many thanks to everyone that has helped and is helping to organize this! I just made the thread sticky.

Hooray!!

I am in :)
Not yet decided if I want to build another aluminum hosing or to try enter the world of 3D printing.

Does it counts as "outside services" if I am using the 3D printer in my office?

PS: thanks for everyone involved

My feeling would be that using a tool/etc. that you have access to and permission to use is not an outside service. Otherwise it would exclude maker spaces and such.

This is of course not an official ruling, just my thoughts.

No. You can use it.

Glad to hear it! Your build for the 2019 / 7th O-L contest was awesome!

Building it under a bridge or where ever the heck that public property was… WOW!

I am in . Just gotta see if I can get the stuff to make it work .

Hey, glad to see the contest running this year again :wink:
Thanks Hoop for taking the lead and to the organizers in the previous years for keeping it alive as well!

I will still decide on entering or not, but if I do, it will probably be with something modded :person_facepalming:

Meanwhile, good luck to all the contestants and good work too :wink: :beer:

Need some ammo for your build?

No, you’ve got plenty already?

Then maybe you could spare a round and do like DB Custom did in the 1st annual Old Lumens challenge!

Now that’s a shiny bullet.

We have sponsors now, (Thank you sponsors!) but what we still need are participants!

I am still not exactly sure of my entry this year, I have a general concept idea. As in previous years, it will fit into the Hand-Made category and will make use of some Wooden components. Nothing new for me there.

My topic is located here, but there is nothing I have not already said there.

This year I will try to save a beloved headlamp

Thank you Hoop for making this to happen

Here is my only memory of Old Lumens…Hopefully we will meet some day…


Giveaway Prize: Sky Lumen XXI #033

User Programmable DriverVN4
Extra internal copper heatsink
LED to light engine solder bonded
Reverse switch with heavy duty boot
Sapphire lens
Sky Lumen Lanyard
Fitting holster
Charger
Secret sauce cell 21700 3000mAH for Max Output
Vapcell P50 5000mAh for max runtime and lower heat
Sky Lumen 2 year Extended Warranty
Free “V54” hand engraved if desired
SPEC included
No-Ox-ID electrical conductive lube included
Winner pick OP or Smooth reflector
Fixed deep carry pocket clip on tail cap if desired
Winner LED choice below:
NB90.16 6000K LED ~ 6000-9000Lumen, Intensity unknown
SBT90.2 5700K DL @2s 4800L, 70Kcd, 529m

OR

Mystery Light - You get to pick Dedicated Thrower or Dedicated Flooder