Picked up a Red SP10 Pro now that they are on Amazon (US). I think this is the most threadlocker i’ve seen on a single light ever. Probably 90% coverage of every thread all the way around. I thought I was going to change the anodizing color with the amount of hot air I was applying.
https://gist.github.com/TimMcMahon/22d7a3895988b627187bde3cf344d126?permalink_comment_id=4222618#gistcomment-4222618
anduril_ubuntu_instructions.md
Ubuntu 18.04
> These are personal notes for flashing an Emisar D4V2 Ti with a KR4 nofet driver using E21A emitters.
> anduril.noctigon-kr4-nofet.hex will be used.
>
> Caution:
> 1. You could brick your D4V2 if the pogo pin adapter from intl-outdoors isn't aligned properly. I bricked my D4V2 Sand.
> 2. Don't install the wrong firmware (e.g. anduril.emisar-d4v2.hex on a D4V2 Ti with a KR4 nofet driver) or you may destroy the emitters.
1. Install avrdude and other required stuff
This file has been truncated. show original