You are an absolute legend! Put me down for a 3-wire version. Iām tired of using my embarrassing homemade key
You got it brother. Iāll hit you up when they come in
Yea, that is pretty ghettoā¦.but effective.
Lol!
Im interested.
Gchart, please put me down for the 4 wire version with diode. That would work great with the UPDI programmer I have.
Thank you, Bob.
Jon, thanks for the link. I just ordered 3 more, one of each color, with battery of course. I see some emitter swaps in my future
congrats, me too
here are some recents
I think Im missing one w sw45k :innocent:
If I have these: https://www.amazon.com/dp/B00LZV1G6K, then can I just solder the wire to the jumper connecting TX/RX or is the diode required?
I just got some of those USB adapters. From my tests, I was able to flash firmware just fine. BUTā¦ I have not yet tried that with just jumping the TX and RX together. Some people have gotten it to work, and I think a couple have not reported as much luck.
Those are the adapters I have, I have not tried any flashing yet, I only connected it to my pc to make sure I could see the com port.
No dice. So where is a good place to get assorted diodes and resistors?
Are these still shipping with Anduril 1.0?
yes
the SC21 Pro ships w Anduril 1.
I use gcharts programmer to reflash to Anduril 2.
alternatively, the Wurkkos TS10, and Sofirn SP10 Pro, ship w Anduril 2
Cool, my SP10Pro is on permanent EDC duty, but I just wanted to see the difference in hand between the 16340 and 14500 size lights. Canāt really take the word of people online about feel in hand because, well, their hands arenāt my hands
I might go for one anyway just because theyāre so(firn) affordable. Just to see how it feels.
I like the shorter (but fatter) SC21 Pro size better than the SP10 Pro form factor. (both lights have the same carry weight)
.
I also like the lighted button better, the clip rides deeper, and it tailstands better
Very nice - the reflectors are the same size, right? I think I heard that somewhere.
Any luck on finding a TIR that goes in without too much sanding or cutting required? Iāve got DC-Fix on my SP10Pro, but Iām curious if there are any other nice lens options.
the reflectors are the same size, right?
actually no
.
I do not have a good undetstanding of the Pebbled Tir Optionsā¦ but yes, I have seen some photos
Ok thanks. Those are nice pinks
Pebble Tir info
Donāt recall if this was mentioned earlier; the TIRs Convoy/Simon sell for the S2+ also fit wonderfully in the SC21 without the glass lens and emitter gasket just as they do in the S2+. The head will screw down more for those who donāt need the warning label to line up I grabbed a random beaded TIR from my stash, probably a 15deg, and honestly wish this were an option from factory, itās great. [image] [image]