First have to sold out the first batch, and i think 2 month later
80 gram with battery included
will no longer do it , still have dozens of MAO in stock
me too :heart_eyes:
I already bought 7+ lights in the last month. What am I doing considering one more? Geez you guys are bad influence.
In for 1 brass 4000k with blue aux 
BTW, I saw someone posting that there’s engraving service on these. Is that true?
No branding is awesome…engraving would take it to another level. I’d like to have a one of a kind light.
Crossing fingers that this is possible.
All Brass version without any brand engraving now, because of unclear to see it after print.
Engraving is work for order more than $129 on one of the light you bought.
Any chanche to have WS10 with AA compatibily and 2x 2000k Cri 90 Led + 1x PC Red Led 660nm?
Any ETA on the silver body being back in stock?
Well I was going to wait until 3000k became an option but I couldn’t resist the brass. I think I’ll mod it into a single with a TIR and keep the aux in it. The triple will probably go in a convoy T3.
Has anyone found a source for other CCTs of the main LEDs?
How about the package of the aux LEDs? I’m thinking there might be some other colors that would be fun to mod with.
FB
no, but you can search for Latticepower 2323, maybe your googlefu will be stronger than mine 
fwiw, the solder pads on the MCPCB are a direct match to E21a:
https://www.eurekatronix.com/product-page/nichia-e21a-1
here are some TS10 mods to E21a:
https://www.reddit.com/r/flashlight/comments/vhic5n/ts10_with_e21a_2700k_is_pretty_fantastic/
https://www.reddit.com/r/flashlight/comments/xdytib/nld_and_nmd_ts10_mao_e21a_4500k_lime_green_aux/
https://www.reddit.com/r/flashlight/comments/w9wrc1/nmd_ts10_e21a_mix/
https://www.reddit.com/r/flashlight/comments/wpc121/psa_dont_run_full_turbo_on_your_ts10_w_e21a/
How is the blinking mode vs the dim and bright mode current draw?
thanks! If this light not much different between dim and blinking b linking should be easily seen enough compared to constant aux.
Just tested my original TS10 from June. This would be my favourite > 5000k EDC light (SBT90 doesn’t count 
)
Interesting. How come the 4000K be off higher lumen than the 5800K?
Anybody tested their light?
Haven’t watched the video. Do both use the same firmware? The default brightness and ceiling have changed between the first and a later release.
true… though I personally prefer the low mode… I do not want to add flashing lights to my environment. imo Aux are being misused as Daytime Disco… LOL
I did a test of a 4000K and 5800K TS10 just now, using the same battery, both lights with ceiling set to 150/150. Both had the same output.
You have been asking a lot of good questions lately. I hope you get to enjoy a TS10 yourself soon. Fun little lights…
I have been EDCing a MAO 5800K w blue Aux. But I turned the Aux Off, and set the ceiling to 110/150. I consider maximum output a waste of batteries. My interest is in Sustainable Output. I do not need to see Aux during the day, and at night the Blue and Green Aux on Low are “too” bright for my nightstand.
Aux are for Disco… Im past that phase… LOL
“Aux are for Disco… I’m past that phase… LOL”
So true! 