Sashi, you might order the UF version, but there's a 50/50 chance you'll end up receiving the Tangsfire version.... 
The first one arrived today and had Looks really cool. It’s smaller than I though it’d be, I ordered one from Shenzen and one from…. Dang who else did I buy from, oh yeah Dinodirect
I’ll look at the box when I get up tomorrow as its in my truck. Shenzen cost $40ish with shipping so probably not the most affordable but I wanted to see how much shipping was on a light that size ($17)and now that I think about it. Shenzen must be the one that got here first cause DD usually has some sort of ad with the packaging.
I am not sure why I bought from two different vendors other than to see the quality difference and to find out who was the faster shipper 
I ordered mine from TMart on 7/12, and it was in my mailbox today 7/18, and arrived in perfect shape.
Mine is the Ultrafire, gray color, with an 18650 it pulls 2.2A.
The beam is amazing; very similar to my TK41in spill, brightness, color and hotspot size, and that is running an 18650.
I may have to invest in a couple of KingKongs and see how they do.
If they just had not put the blinky modes in, it would be a near perfect torch.
Mine standard only pulled 2.7 amps with a couple of different King Kongs. It was still amazingly bright though. The spring in the tailcap was only dry soldered onto the board. It may be worth checking it out.
I wouldn’t mind knowing the dimensions. Looking to shove the driver i just bought from you in my HD2010.
Yeah, me too. This could be handy information for many of us! Actually, how about some details on doing it like where to get the brass ring (or how to cut down the P60 pill to fit)?
-Garry
so the lightmalls will take a 26650? if so which is the best?
i am loving it here at blf, thanks everyone for being willing to answer questions from educated but NOT expert flashlight lovers!!
ken
im also looking to pickup one of these - tmart looks to be the best price @33.52 shipped… unless someone can find a better price?? 
any comments about running a mnke 26650 imr? if this light is direct drive on high i dont want to fry the emitter with an imr (i have redilast 18650 protected and panasonic 18650 unprotected as well i can use)
edit: i managed to do some searching myself and found a tmart 8% coupon (code is INSPIRE if anyone wants it)
i signed up for their newsletter etc and got 50 points
total = 30.34 shipped
based on the 10% coupon above i ordered from tmart, keep you posted.
ken
Got my HD2010 from Tmart today. The usual nicks and dings in the finish that others have mentioned. At least with the light grey finish they aren’t quite as obvious. The reflector on my copy seems good with no marks or scratches and it’s quite clean. There was no insulator between the back of the reflector and the wires to the LED, so tightening the bezel caused a predictable short.
One o-ring broke while taking the light apart but they are all crappy thin ones and will be replaced anyway. Tail cap was tight but had a bit of flicker when shaking the light. Tightening the pill into the head fixed it. No lube anywhere on the light.
Massively built - it feels heavy in my hand. Not much brighter than my KD C8 on a ceiling bounce, but boy does it ever throw the light down range. This is my first thrower, so I have little to compare it to. But it lit up a large building quite well at 167 metres. This was in a city park surrounded by street lights so it would be even better in full darkness. Can’t wait to get down by the river with a fully charged batt. 
Has anyone found nice black ones without any marks on the finish?
I ordered the Ultrafire HD-2010 from tmart.com, and just got it in the mail today. Is it supposed to have “Ultrafire” etched on the side as all the pictures of reviews show? Because mine doesn’t. And now I’m confused :~
TMart for mine as well. I just received a second gray model, I prefer this color to black. The second one had a minor defect, the o-ring on the cap was broken, but it functioned fine.
Which color did you order? I ordered from Tmart the black color one just because I read alot of posts where the gray ones were nicked. Mine had one slight nick and had the Ultrafire printed on the body. Good purchase, good thrower.
I got the gray one. The name isn’t etched on the side though.
That’s a first I heard of this. Mine (black) has Ultrafire HD2010 written on one side and CREE XM LT6 on the other side.
Mine has the “CREE XM-LT6” on one side, nothing on the other.
my gray light from tmart arrived in only 2 days and is in immaculate condition…no nicks in the finish, no nicks in reflector, emitter is centered, no ugly colors in emitted… too thumbs up!
In only two days? Wow, that must be a world record for Chinese vendors!
it was shipped from new jersey, usa… i live 2 states away in CT
Ah, wish I lived in the US as well and got quick shipping from US warehouses too.