Ok Guys, I received a reply from Jim of Manafont. In it, he mentions if he can assist in the return process? He quote “Please do not worry about the return shipping cost, because we will be able to cover it if the item is verified incorrectly shipped.
To save your time, I will do my best to issue a cross-shipping. So you will not need to wait for verification of returned item.”
So, should I be doing a paypal dispute before I do a return shipping or should I trust this guys?
Can't seem to post a pic but the version lightmalls is selling comes in an unmarked box with the darker, coarser braided lanyard. It came *very* clean and lubed, cleanest assembled anything I've gotten from China ever. Some dust under the tail cap. Light tool marks, no burrs or metal grit anywhere.
The pictured differences in dimensions between the mimic and the OG on Manafont are so close they could be caliper/user error.
My light is CW (looks a bit bluish compared to a NW) and works great except you can jostle the switch on. Unscrew the batt tube 1/2 a turn to lock out the switch.
Haven't seen anyone post a serious complaint about the mimic so not worried, but I'm a n00b. Thanks to y'all for steering me to this light!!
Are there 2 different drivers?
Apparently there are from that source, and those are two different heads in the pics above.
Yes it will. I'm using XTAR 18700s in mine without any problems.
Where do i buy a real King not the mimik?
has this flashlite…no long live…do you have the same problem? after 3 months of use…how are yours???
Cnqualitygoods
How thick is the glass lens?
On the King does the Glass lens sit in front of the O ring?
Glass then lens "o"ring then reflector, can someone confirm this please?
On the black SRK, - Bezel, then glass, the O ring is behind the glass, around the reflector.
There’s another on the body, at the end of the thread.
Hello everybody, I made two videos of this flashlight, bought 42€ (56$) including shipping cost :
Hello, I bought Sanyo 2600mah batteries for my SkyRay King but I can't use it because they have a flat top...
Look this :
Someone has a solution to use these batteries in this flashlight please?
Thank you for your help!
Hi. Some have used magnet 1mm x 5mm +superglued around outside edges +on positive anode of your flat top battery. Otherwise, buy proper battery.
Or a drop of solder.
Thank you for your help, finally I ordered Xtar 18700 2600mah batteries. 
Anyone know how waterproof these are? :D
I have one. Trying not to drop it in a especially deep puddle as yet.
Frankly speaking. I’m not too confident about the waterproofing. The threads are quite shallow on the front bezel. The glass is not tight enough to seal the front. However, I’ve not seriously tested it.