GB: 20mm Sinkpad copper boards CLOSED

Yes they are 2.50 each plus shipping ill put up my payment info in a few days so we can see how many to order

put me down for $10 worth, and round up to the nearest board… so, 4 now, 7 if we hit the next stage, 8 for the next stage, 10 for the last stage…

if thats going to be a pain… lets just say

4 x XML + bubble mailer

Got it, I’m posting on post 2 on the Quantity on what we are up to :slight_smile:

Do you think you will try do do 16mm in the future?

They told me that I’d have to pay $1500 for 16mm boards and ill get 400-600 boards just because they will have to be custome made

WOW!!

Thanks for the fast reply. I wish I used 20mm boards.

in for 5 xm-l boards+ 2 xp-g + intl shipping to Greece. Please inform me about intl shipping cost!

10 x XML, please

I have US address if needed.

4x XM-L, 1x XP-G, bubble mailer.

If we can get the price break for >300 boards I’m in for a few more.

6 XM-L boards, bubble mailer, US :slight_smile:

thanks again for sorting this out! I’ll post it on the mtbr light forum, see if we get any more takers…

More the better :slight_smile: 2nd post updated

I’m in for 10 XM-L boards
I’m in for 10 XP-G / XP-G2 as well…thrower projects :wink:
Toronto, Ontario bubble pack, cheapest way that gets them over that imaginary line between us :slight_smile:
Edit: doubled my quantities, I’m confident we’ll get over 300!

Can’t hurt to ask :slight_smile: but I think that’s all they have

If we wanted those we have to pay $1500+ and make a design for them and we will get around 300-500 boards at that price that will be expensive

Only how I know is because I asked for 16mm boards and they said it will have to be custome made

Put me down for 5 XM-Ls with a bubble package. :D

@nitro&relic: I think you guys are a little confused? relic asked about XPG and XPG2 and nitro posted in the OP that we can get XML and XPG.

Yup, thx, I went back and read it again. :slight_smile:

Is anyone interested in selling these boards with chips installed onto them (i am not able to do it myself)

I’m just getting what they have made and in stock

If u need something they don’t have the price starts out at $1500

That might lead out to be 3-5 bucks a board :frowning:

Bort I can do it if u order the led or I can order it an reflow it to the board ??

im hoping the cooktop method works decent enough for me…

i may have to grab a couple xpg as well… i got to wait and see though.

Hey guys I just sent a msg to the company and I asked if they had boards for the xpg2 and this is what he said

Board footprint remains same for XPG and XPG2. LED footprint is exactly same. Same PCB you can use for XTE also.