The P2A is a forward clicky not reverse. At least mine is and I assume they all are.
I’m looking forward to this review because I own the Klarus P2A, 4 Jetbeam BA10s and a Klarus P1A. The P1A and BA10 are just single AA versions of the P2A and BA20.
Thanks for the review fran.
Klarus P2A is my best 2xAA, it always goes in the car.
The P1A is a good EDC. Maybe I should try a Jetbeam of this series?
question : There are differences between the convenience of use of the clips?
Sorry, It is hard for me, explains the question :_(
About the anatomy of clips. in the clip Klarus P1A lengthening toward the tail, Jetbeam not. Does this affect the comfort when placed in a pocket?.
I prefer the “placement” of the jetbeam clip, making the light to be “facing up” when carrying in a pocket. That way you “see” if the light is accidentally switched on.
Also, the clip on the Klarus, is extreeeeeemely strong, and sometimes it will make very difficult to place it in a pocket.
But, finally, I think that is “personal opinion”… maybe you will prefer the light “facing down” into your pocket…
I hove both these lights. Hardly any difference. I like the Klarus slightly more simply because the clicky feels a little more solid on my light. Other than that, they are pretty much the same light.
Pretty much the same light and so are the P1A and BA-10. On the P1A the clip placement is more important and more useful. The BA 10 clip is silly. It is in the middle of the light with the lens up. Makes no sense.
I love my PA2 but my PA1 has lost favor since it is not as bright and is slightly greenish tint. I have not put a 14500 in it yet but have in the Jetbeam BA10 and it changes everything. I’m not sure if it is safe for the Klarus or not.
True about the clicky. The Jetbeam's is very squishy.
The only thing I noticed where the Jetbeam is superior to the Klarus is the way the head makes contact with the tube in high mode i.e. via the two springs at the edge of the PCB. With the Jetbeam I always only have either low or high as selected, the Klarus sometimes is changing the mode when the head is pressed laterally if I fail to tighten the head firmly.