New Seller--cnqualitygoods.com say Hi to BLFers

Commercial Sellers' Spot
81

I haven't got mine yet.

82

There is a review coming. Stay tuned for news.

83

I'm wondering if this one Edi-T P15-R2000 would be good enough when it comes out. Looks promising, but price might be to high for our tipical budget.

It's about size of C8. I've found it when searched for 38mm aspheric lenses which might get foyed into C8 acording to http://www.forolinternas.com/viewtopic.php?f=4&t=1803&hilit=ultrafire+c8 .

Yesterday I've tried UltraOK zoomie to become a XM-L light. Only partly succeded. I've used 1.4A driver but got only 1.05A at tail. Nevertheless, stock optics isn't good. With some spacers I've managed to get good projection, but it was far less bright. After some reports about Yelz t8 this was expected. I've tried to put 28 and 30mm lenses in front by hand and it gets little better, so I thought even bigger lens would be needed. 38mm might be right dimension for further examinations.

Anyone knows where to get budget 38mm aspheric lenses with zero or minimal shipping costs to EU?

84

Looks promising... I hope they also sell it as flashlight-only (not kit).

85

I got mine today. Was initially unimpressed , then I realised it had modes. high- med- low. no strobe. It isn't a C8 but it is zoomable light. You don't seem to get the tight hotspot where you can cleary see the led. Overall it is well made. Looks bright to me but I haven't tried it outside. I my recent Romisen purchase already has a snapped o ring and a faulty tail cap after a few uses so this appears to be better made.

86

The C8? From where?

87

Hi there, Ric. What type of switch does the N-Light L2 has? Or it's a twistie?

88

Hi Ric I was also wondering about the N-Light L2 can you tell me the diameter of the torch as well as the switch type. I purchased a Yezl Z1 from you and I really like the L2 so I wanted to know the size to compare it to the Yezl before I buy it.

Thanks,

E

89

Yeah, looks like a pocket thrower with that R3 :D Would be nice to know if you (will) have a R5 version too.

90

NO.： 2011022316314

Been quite a few months now , just wondering whats happening ?

Cant take 3 months to fulfil an order ?

91

Hello old4570,

Sorry to hear that.

For shipping issue, please send email to cnqualitygoods@hotmail.com

We'll take care of you.

Thanks

RIC

92

It's a reverse tail cap click switch. 3-mode, hi-mid-low.

Compared to Z1, it's more floody. Diameter:23mm

Ric

93

I might have sent previous emails to Sales @ CNQ

Matt

94

Thanks for the reply, Ric ;)

More floody than Z1 with R5? or with XM-L? or Q5? Can see a good concentrated beam :~ (unless this is an old shot with Q5 emmiter)

And by the way, L2 switch is like B2S switch or it's has rubber cap? Thanks.

95

Hello,

L2 R3 is more floody than Z1 R5, and Z1 has more lumens.

L2's switch comes with a tail rubbler cap, while B2S uses stainless steel tail switch.

Ric

96

Recommend one tiny 14500 Zoomable light, 11.5usd only.

http://www.cnqualitygoods.com/goods.php?id=1075

97

Let us know when old4570 receives his order, you might have better luck here if you actually deliver the product.

98

Looks nice. Is there any way we could get this with Low->Medium->High modes without the strobe?

99

Looks like their website is down, hope it is just a temporary thing.

100

Thanks for the info, Ric, much appreciated ;) I really like the body of L2, wish you have it with R5.

BTW, actual L2 pics on your web shows Q5 emitter, not R3 :| And that beamshot looks like Q5 rather than R3 :~