Calvin - I agree with RacerR86, I'd love to see the 18650 be put to the ultimate test - HKJ. Any chance of getting 2 cells to him?
For me, I'd be very interested in the 18650 if it compared favorably with the Samsung INR 20R for low resistance. Any thoughts on that? Otherwise, I'll just be ordering the 16340's and 14500's for sure, maybe the 18350's.
We've picked up the F8, M1, M2, S2, S3, S4, S6 already in NW and CW. There are some issues with fitting protected cells in some of the however, depending on interest we might pick up the other models too.
The discharge tests were done down to 2.8V.
We're considering sending some to HKJ but we've been satisfied with our own internal tests.
We were not impressed with the test results of the 10440, 26650 is a possibility in the near future.
Our internal tests show the 18650 easily outputting 10A, we've tried as high as 15A & 20A but wouldn't recommend them or only for short bursts.
Hi Calvin, just wondering what you do in the case of someone wanting to use protected cells in the S4 or 6? The statement - “Please let us know in the order comments if you’re going to be using a protected cell, we’ll try to account for it!” - makes me think you modify the light somehow?
Officially USPS has a partial lift on their ban of Li-ion batteries. Also officially the batteries must be "installed in their intended devices." There is not a big issue.
There are manufacturing tolerance differences among the battery tubes, we simply test to see if a protected cell will fit, we do not modify the lights. (We weren't aware of this before purchasing the Convoy line)
Ohaya, IS tested them at 3A and got 820mAh, it’s understandable that they’d do better at 1A.
I ordered a 16340, 18350 and 18650 (and another XML2 5C1)…and they’re here TWO days later! Thank you guys, for the quick and excellent service, heck, just the chat with Calvin was worth the money!! He made sure an add-on to the order got shipped and that I got my BLF discount even though I’d forgotten to put it on there (again). With the whole China thing going on, it’s good to know we have an awesome battery supplier here in the US. 8)
Of course I do, but I think you were serious when you quoted the 942mAh@1A figure. I just wanted to point out that they use the much more difficult 3A test and it STILL came out almost to spec.
Calvin ran two tests on a battery I was interested in…While We Were Chatting!! Try getting Anyone else to do that!
BTW, thanks Ohaya for your number on the 1A test, that’s good to know!