Status update:
Kinoko IMRs have been sent to HKJ, awaiting his busy testing schedule.
Armytek full lineup is coming to Illumination Supply including the Wizard Pro Warms, we'll also be stocking the new Grizzly MT-G2 as soon as it comes out.
Limited selections of the Thrunite, Jetbeam, and Niteye line will also be making an appearance if they haven't shown up by the time of this post.
ohhh man I am loving that Armytek Grizzly.
Hoping to see a nice price on that.
The head will have to be HUGE in order to achieve the numbers they are putting up!
Hotspot:
4 °
Spill:
40 °
Shame they aren't being driven harder.
Another comment on Armytek, I spent the weekend camping, and the Armytek Wide got A LOT of use, more so than any other light I had on me (and I had a lot ;)).
It performed perfectly, and had one feature that put it over the top vs the Zebralight headlamp, which also came with me.
It had a nice deep pocket clip, so I could literally roll out of the tent, clip it on, and go.
Sounds like Vinh needs to get his hands on it!
A big downside to Armytek lights... they are not modable. The head is sealed, and IIRC Vinh was not able to mod a Barracuda.
I have to say the L4 is a must have light! Impeccable quality and performance. Super stuff!
Hope to ses Convoy L2 in the best future.
^
+1
Looks awesome also.
We've been looking into these, the problem has been the battery tube tolerance differences and poor sales across the lineup in general.
New batteries listed!
Panasonic NCR 18650PF 2900 mAh High Discharge Flat Top (Made in Japan)
Free battery case when ordering in pairs.
Specifications:
Minimum Capacity: 2750mAh (0.54A discharge at 20°C)
Typical Capacity: 2900mAh (0.54A discharge at 20°C)
Nominal Voltage: 3.6V
Discharge End Voltage: 2.5V
Standard Charging Current: 1.35A
Charging Voltage: 4.20+-0.03V
Standard Charging Time: 4.0 hours
Max. Continuous Discharging Current: 10A
Internal Resistance: less than 35 milli-ohms
Weight: less than 47.0g
are those the new version of the PDs?
!!
are these the newer version of PDs?
Yes, these are the updated PDs.
Congrats…looks like the Kinoko 18650 HKJ tested did really well!
Great news, the information matches expectations from our own testing.
Mmmm.
Do you have a link?
Working on the listings, should be up by tomorrow. Unfortunately the pricing on these won't be great. Our margin from Cutter is abysmal.
Hopefully the shipping won’t be $14+ :)!!
No, we don't try to profit through shipping. We try to set shipping as accurate as possible based on weight. Shipping for MT-G2s should be very similar to other mounted CREE LEDs.