Emitters from Mountain Electronics have been added to the spreadsheet. Thanks for adding them RMM! (there are no links though) Feel free to contribute more, and update/post in this thread too. :)
For all the people in the US it must be great having another good source for lots of nice emitters. Its also nice for international buyers since shipping is generally fast. I have god experience with this seller, and I am sure many US buyers have too. :)
IOS have gotten some sweet XP-G2s.
XP-G2 R4 5A2 with 70+ CRI (not 70 CRI typical which is normal).
Just saw on the ebay lck led store that they sell xpe2 in 1D tint, but also in 7C tint (Q3), on a 16mm board, $2.21 , have not seen that one before. By the way, the edit: 20mm xp Sinkpad goes there for $20.25 for a sheet of 15.
Would be nice if lck led would list the tint on their actual website. XP-E2 on ebay
Sort of hesitant to put ebay links into the LED database since the links expire if the listing isn’t endlessly renewed. Thoughts?
“Q4” in title, Q3 in discription. :weary:
~ edit ~
Is LCK-LED reliable with bin & tints?
$20.25 for the sinkpads? I’m seeing 15pcs Sinkpad XP 20mm for $22.50. Still the best quantity discount on copper stars without a dielectric layer.
These XP-E2 tints might also be available on 14mm and 20mm stars at LCK-LED.com only the tint isn’t listed on the page.
LCK-LED carries 16mm, 20mm sinkpads in XP, XM on their site. You could inquire about their quantity discounts if you need something other then the XP 20mm that is currently in their ebay store.
Dunno what happened, I suppose they did not change the price since this afternoon, so I must have quoted it wrong, the ebay-site also says: 3 sold, 2 left.
XM-L2 T6 4D, 4,98$ and upwards (mcpcb size: bare emitter/12/16/20/25/32)
XM-L2 T5 5A2, 4,98$ and upwards (mcpcb size: bare emitter/12/14/16/25/32)
XM-L2 in 4D tint is an emitter I look forward to try. :)
When it comes to 5A2, personally Id rather stick to the 5A3 from IOS which is 80+ CRI and can be bought mounted on Noctigon. But its nice having options. :)
Can be, I just found it there is a new one and also on KD.
Have enough IS Nichias and Carclo lenses. But these random KD Nichias can be nice for the lowest budget mods.
If it’s only D200 and higher L or M voltage, it’s just like good old IS 219A B10 L.
219b 4500K 92CRI B220 bin on 16mm star now $13.34 for 5 pieces at Kaidomain :-) .
I got one from KD the day before yesterday, I tested this led (on copper) last night together with the B280 bin 5500K 219b (also from Kaidomain). I could not measure tint or CRI but my not so reliable impression is that those could be correct. I will try to post the results tonight but I am very tired, so it may be tomorrow.
S2 = 148 to 156 lm @ 350 mA ... I've seen the same thing a few years back with the SSC P7. Seems as if the Chinese sellers can offer better flux/color bins because they buy larger quantity's ... I don't really know why but you can see the same with the color bin of the XM-L2. It's pretty much impossible to buy an XM-L2 U2 1A here in Germany although I pay 13,5 $ compared to 6-7$ in China.
Neat if only they did not pull the specs out of a datasheet, forum, other shop and paste them onto what they currently randomly happen to have on the shelf.
Aurum: you can, if only EU shops cared to have any of the emitters at all, rare to even be able to buy them. I know only of one shop here, some are in Germany but nothing impressive when it comes to selection either. They can’t or are not willing to go as low with the price so most just buy the things in Asia with free shipping… compared to expensive shipping in EU.