LCK-LED ebay listing
15pcs Sinkpad XP 20mm - $22.50 ($1.50 each)
XP-E2 Q3 7C (3000k) 16mm - $2.50
XP-E2 R3 1C (6500k) 16mm - $2.45
These XP-E2 tints might also be available on 14mm and 20mm stars at LCK-LED.com only the tint isn’t listed on the page.
LCK-LED carries 16mm, 20mm sinkpads in XP, XM on their site. You could inquire about their quantity discounts if you need something other then the XP 20mm that is currently in their ebay store.
Dunno what happened, I suppose they did not change the price since this afternoon, so I must have quoted it wrong, the ebay-site also says: 3 sold, 2 left.
wow, that was fast!
From Fasttech
XM-L2 T6 4D, 4,98$ and upwards (mcpcb size: bare emitter/12/16/20/25/32)
XM-L2 T5 5A2, 4,98$ and upwards (mcpcb size: bare emitter/12/14/16/25/32)
XM-L2 in 4D tint is an emitter I look forward to try. :)
When it comes to 5A2, personally Id rather stick to the 5A3 from IOS which is 80+ CRI and can be bought mounted on Noctigon. But its nice having options. :)
http://www.maritex.com.pl/en/shop/products/ggid/18074
Here there is so much stuff!
MT-G2 4000K
MCPCB 4x XB-D
XP-E2 Q4 7A3 O_O
Unfortunately, we need at least € 50 minimum order!
Nichia CRI92 NVSL219B-E R85 B220 LED
Is listed in DB as D200 but KD tries to sell as B220 so lets say it’s supposed to be D220?
Not that I believe it.
KD may have changed the bin as I recall it being just below Illumination Supply’s 219B R85 D220.
Can be, I just found it there is a new one and also on KD.
Have enough IS Nichias and Carclo lenses. But these random KD Nichias can be nice for the lowest budget mods.
If it’s only D200 and higher L or M voltage, it’s just like good old IS 219A B10 L.
219b 4500K 92CRI B220 bin on 16mm star now $13.34 for 5 pieces at Kaidomain :-) .
I got one from KD the day before yesterday, I tested this led (on copper) last night together with the B280 bin 5500K 219b (also from Kaidomain). I could not measure tint or CRI but my not so reliable impression is that those could be correct. I will try to post the results tonight but I am very tired, so it may be tomorrow.
New XPG2 bin, S2? (more importantly, does anyone believe the first sighting of a new XPG2 would be at KD and at a ridiculously low price?)
S2 = 148 to 156 lm @ 350 mA ... I've seen the same thing a few years back with the SSC P7. Seems as if the Chinese sellers can offer better flux/color bins because they buy larger quantity's ... I don't really know why but you can see the same with the color bin of the XM-L2. It's pretty much impossible to buy an XM-L2 U2 1A here in Germany although I pay 13,5 $ compared to 6-7$ in China.
djozz: if it’s the review I’ve seen, then the KD 219B is sort of a random and most likely not R85 but worse bin with colder tint than SW45.
Comfy: lulz, guess we have been writing about triples too much 0:)
Now KD tries to fish.
“Even more” ridiculous:
Triple Cree XP-G2 R5 LED 4C Neutral White 20 x 1mm Star (Parallel) w/ optics
For $7.02? With optics…
Right. Either they robbed a warehouse or I don’t know.
1A good for dedome.
Neat if only they did not pull the specs out of a datasheet, forum, other shop and paste them onto what they currently randomly happen to have on the shelf.
Aurum: you can, if only EU shops cared to have any of the emitters at all, rare to even be able to buy them. I know only of one shop here, some are in Germany but nothing impressive when it comes to selection either. They can’t or are not willing to go as low with the price so most just buy the things in Asia with free shipping… compared to expensive shipping in EU.
Yeah, I'm not doubting that the S2 bin exists (it's in Cree's PCT after all), just doubting that it would show up there first.
Thats what I do all the time ... led-tech.de offers most LEDs but doesn't offer great bins at all.
I just checked it and Cutter has XP-G2 S2 2B. But there was a thread on CPF, only two posts haha and the person was confused and said the page on cutter was not accurate etc.
Really, can’t they come up with a new/newer product in such a way that it is believable for people? List and show a photo of the reel with code.
Otherwise, anyone can sell XP-G9 Z9 CRI99 J) No biggie in Asia to do so. Big deal in EU where you get fined for such things.
Kinda like how the only appearance of the XML2 U3 so far has been in $12 C8s? lol
Has anyone bought any emitters from dealer: Simon / BLF user convoy-flashlight yet? Im considering buying 50 XM-L2 T6-1A on 20mm mcpcb’s but not sure if they are the real deal. I started a thread here but havent received any replies yet.
Here’s his Aliexpress store link for the emitters.
His Aliexpress store is Shenzhen Great Wall Technology Co., Ltd. Store No.330416
Eagletac use Nicha 219A B11 bin or XP-G2 S2 bin in their MX25L3. First seller I saw. Im skeptical to KD no matter what they sell.
Ive bought varius emitters from the aliexpress seller in the past. Seemed good to me. But I did not buy any XM-L2 T6 1A (nor would I consider buying them).
Im quite sure several people here have bought T6 1A from him in the past. Hopefully someone can share their experience.
If you just want cheap CW XM-L(1), then there is probably many here who can sell them very cheap (Spare emitters laying around due to upgrades).