New Roche F6 EDC XM-L2 Single 18650. $20.99 shipped.

Glad to hear it will accept NRC 18650B ,adds a bit of safety to a phone charger

they did not ask me for any pics…

Got mine today,
Me too, Banggood forgot to add my charger head.

So I’ve asked for the resend. Light ain’t complete without it :stuck_out_tongue:
Don’t know why they asked me for pictures, didn’t mind to make them.
Just hope this time it gets send a bit faster

Sorry,I heard some of you bought the Roche F6 with charger head,but received not.

I apologise for the mistake of our warehouse colleagues, if you get the package without charger head, pls contact me.

My F6 is dead now, first the flickering then it seems to have shorted out. Bottom spring blackened and some of the plastic on my battery burned. Waiting for answer from BG, think the return shipping will be too expensive but maybe a partial refund is possible without returning it.

And now I got an email saying they refunded me and I should check paypal in 48H
Responed to the email and contacted banggood here. Hope to get this solved and just get my head charger.

This is becoming one of the worst slowest order on banggood for me.

Can anyone confirm if there is room for a 8x7135 driver (Drjones, connected to the electronic switch) inside this light?

Still waiting for mine, ordered Nov. 17, shipped Dec. 20; I hope it comes with the charger head...

Still waiting, too. Ordered Nov 21, shipped Dec 20. I also ordered the charger head...

Can’t get mine apart! I’m going to take it to work, see if I can get into the head. I really need a DrJones driver in this light, it would make it almost perfect for me.

Still no flashlight.

Well, I was on time with my reply.
No refund but resend.
Let’s hope it’ll arrive soon.

Received mine today, no charger head

Received mine with no charging head as well.

Got mine today, and no charger head either, even though the label on the plastic bag said "SKU104954 with charger head"

I like the design, quite compact and nice.

Heat transfer to the body is very good; there's no pill, the LED MCPCB sits on a shelf that's integral part of the body.

Measured 2.5A / 0.8A / 0.2A; quiescent current is only 1.3µA, quite nice.

I don't like th UI though: When off, a not too short press (about 1/3 s) is required to turn it on. When on, short presses switch through the modes (H/M/L), and a quite long press (a bit more than 1s) is required to turn it off. I haven't found strobe or SOS yet. There's a red indicator LED opposite to the switch for low battery indication. Also med and low have an ugly ~170Hz PWM.

Unfortunately there's not enough space in the head to put a NANJG105C there, so modding with a better UI will be difficult.

No room for DrJones driver, no buy.

Thanks. :)

Geez, I like this little light. I might end up designing a driver PCB for it.

Oh no! One of your drivers would make this light perfect, I was looking forward to fitting one.

Me too....