LUMENSTEINS LUX MONSTER

Either way, it will prove to be a project 'an sich' to align the hotspots in triple throwers like these .

We like the little- useful Spill we got.

This light will be lost @ using an aspheric.

And we like to do it in an other way, to get the LUX.

Regards Xandre

Pics, or it didn’t happen :wink:

Will coming soon :wink:

Regards Xandre

I don’t see pictures! J)

Post 117

Xandre

Nice build and nice pics. Hope the people 635m away don’t get blinded.

Maxabeam vs LEDLUXmonster Post 132

Some Beamshots added: Post 133

Xandre

Xandre could you please post pictures in this thread? I can not open pictures from your link(my friend either)

Thanks...

http://www.taschenlampen-forum.de/attachments/fritz-moddings/22339d1392056635-led-lux-monster-2014-02-10-18.38.09.jpg

http://www.taschenlampen-forum.de/attachments/fritz-moddings/22340d1392056689-led-lux-monster-2014-02-10-18.39.03.jpg

http://www.taschenlampen-forum.de/attachments/fritz-moddings/22341d1392056738-led-lux-monster-2014-02-10-18.27.47.jpg

1. Control
2. 409 Meter
3.Just for fun

Xandre

You have to register on the German forum in order to see those pictures so I just thought that you could put it here via insert picture button?

Could someone please start another thread with pics of this build? Id love to see the build progression and what parts were used to achieve the final result. Its difficult to follow along with only a translator and no pics.

+1

2M lux with LED! Can you imagine that? From the beamshots it lights up the trees at 700m like it was in daylight, truely mind-blowing.

Where is the picture insert button ?

Plase tell me how to do it.

Regards Xandre

Hi Xandre, it’s very simple and you can refer to this thread,

With this guide I am looking forward to see more of your crazy mods and beamshots. :bigsmile:

Thanks

Off @409 Meter:

On:

Just for fun:

Outside:

That looks very impressive. Can you please post a build thread here… with pics if possible? Many of us would like to build this light but dont know where to begin. :slight_smile:

The beginning is buying:

the reflectors,
the host,
the driver, touchy,
the battery (5S Lipo),
volt checker,
LEDs,
Alu rond 150 mm 20 mm,
Copper rond 150mm 3mm,
Srcews and cabel etc…,
heat creme :smiley:

It is best when you have an lathe,or someone do it for you…

And it is not an easy job to build it.
The host seems really big,but it just look so.
Inside (Batteryroom) is full. No space at all…

Xandre

Now we change the XP G2 R5 to XP G2 S2

DerWichteldriver @ 5A
and a new special dedomimg methode from Vinz
with a special finish.
No green tint and some procent more brightness.

Now 2,2 Mio LUX measered with a Gossen Luxmeter @ 32 meter.

Beamshots with some other modds and flashlights:
http://www.andis3d.de/beams-04.htm

Maybe we are going to take more amp…