CLOSED! Group Buy: Starry Light SA-22 BLF Edition (NW emitter, better modes, faster PWM, BLF logo)

[unknown00101]

@esrevenge

Whats the difference between these:
Both NW (XM-L2 T6 3C, up to 200pcs) and CW

can somone please tell me in regular english Im a real noob here on these terms…or which one is more desirable or better to get?

Going to place my order tomorrow am. Thanks!

Up to 200, I’m assuming means thy can sell up to 200 units with the neutral white emitters.

The difference between NW and CW is a matter of tint preference. Most seem to prefer NW, but a few of us prefer CW.

Tint, Binning, and CRI Explained (For XM-L LEDs)

I figured I'd make a guide related to XM-Ls and tint, binning, CRI, and all the other details I can think of. Tint There are 3 basic tints. Cool White is a very pure white and is what most lights are. This generally has a low CRI (color rendition index) and will not show colors that well. Some people say that it is to blue. It is generally around 6000k. Neutral White is considered to be one of the better tints as it still seems fairly white, but does have a higher CRI. It …

[Bort]

@DPRoberts

@Bort

They now have a no logo option so that is good (or i missed that option before)

I’m fairly certain it wasn’t there when I ordered mine - the only other option at the time was to add your own logo. I guess I’m getting the logo. Out of curiosity, what exactly is the logo?

That option was not there before, i had a link open from earlier and just before i closed it i checked.
I also want to know what the logo is, i bet its that crummy one shown above.

[Ejected_Filament]

@Bort

They now have a no logo option so that is good (or i missed that option before)

I looked yesterday, options for emitter and logo were both there then.

@unknown00101

…Most seem to prefer NW, but a few of us prefer CW.

Heathens

[Bort]

@Ejected Filament

@Bort

They now have a no logo option so that is good (or i missed that option before)

I looked yesterday, options for emitter and logo were both there then.

no logo option, it had two options, BLF logo for free or custom logo $2, now it has 3 options, blf logo free, no logo free and custom logo $2

[Bort]

@Ejected Filament

@unknown00101

…Most seem to prefer NW, but a few of us prefer CW.

Heathens

he can give up CW for lent

[Ejected_Filament]

I was deliberately ambiguous…

[HBomb]

@Bort

@DPRoberts

@Bort

They now have a no logo option so that is good (or i missed that option before)

I’m fairly certain it wasn’t there when I ordered mine - the only other option at the time was to add your own logo. I guess I’m getting the logo. Out of curiosity, what exactly is the logo?

That option was not there before, i had a link open from earlier and just before i closed it i checked.
I also want to know what the logo is, i bet its that crummy one shown above.

My guess is that the logo will just be “BLF” in plain text. Easiest for them.

[Bort]

@HBomb

@Bort

@DPRoberts

@Bort

They now have a no logo option so that is good (or i missed that option before)

I’m fairly certain it wasn’t there when I ordered mine - the only other option at the time was to add your own logo. I guess I’m getting the logo. Out of curiosity, what exactly is the logo?

That option was not there before, i had a link open from earlier and just before i closed it i checked.
I also want to know what the logo is, i bet its that crummy one shown above.

My guess is that the logo will just be “BLF” in plain text. Easiest for them.

Without seeing what they will use when i buy one it will be no logo, i hope they have some lights left tomorrow

[ezarc]

Bought x2, 3C with no logo.

[Gj1 (Gj)]

I think the logo is just BLF in text. For a graphic logo they require an Abobe Illustrator or Coreldraw file. Unless someone sent a graphic file it should just be text.

[Bort]

@Gj

I think the logo is just BLF in text. For a graphic logo they require an  Abobe Illustrator or  Coreldraw file. Unless someone sent a graphic file it should just be text.

funny how i haven’t heard of coreldraw in many years until today

[Trevi_lux]

Ordered one NW.

[leaftye]

Was there a review?

[MRsDNF]

@leaftye

Was there a review?

Mini review here by the here.

[zelee]

ordered 1

[wight]

@Bort

funny how i haven’t heard of coreldraw in many years until today

I think Coreldraw is typical for this application (CNC logos & designs).

I ordered one NW w/ “BLF Edition” logo.

[Flitsmal]

Ordered 1, thanks ‘the’ and cnqg!

[Lithium]

Ordered one in NW, thanks!

[tjhabak]

I think I ordered two in NW. Did anyone else get a payment failed message after paying? My Paypal account still shows two $23.00 payments, but on the vendor’s site it says payment failed.

[tryps]

Great,
ordered one in NW.
According to product page custom logo can be done on both side of the body, not the Head.

tryps