OOH OOOH OOOOH!!! Waves hands…if you are gonna chuck the SC01…I claim dibs
And yeah…the PWM on stock lights just bother the heck out of me…this is why I started running custom firmware on Nanjg 105C’s and upping the PWM frequency…the light looks more “solid” rather than flickery…kinda like changing the refresh rate to 70-75hz on an old CRT vs the 60hz…you CAN see the difference
My SC01 and SC03 are getting close, supposedly on the island, but getting bumped around - "out for delivery" one day, then next at a sort facility, yikes! This hasn't happened to me for a while. Hoping in the next day or 2, then I'll do some thorough measurements - amps, output, take a lookie at the drivers, etc.
How bright are these in the real world?
I am more interested in the 14500 version but the specs are better on the 16340 version so I am confused. I would expect at least 350 lumen from a 14500 light…
If someone disassembles theirs please take some pictures and measurements…
I am using CR123A primary in the SC03s I am keeping in my cars’ glove compartments. From what I understand, Lithium primaries are better for glove compartment use due to their long lives and extreme temperature tolerance.
My extremely scientific conclusion is “Them lights put out plenty o’lumens with CR123A” The battery will probably last less than 10 minutes on High mode!
hmm… I never try to light it that long, I should give it a try and see how long does it last on HIGH mode and see if there’s any protection against heat
Lights with electronic switches have always a parasitic standby current, how high this is depends on the driver. Just think of that(or test it) if you want to use a light in a glove box for longer periods….
Hmm . . . do these (particulalry the SC01 which I'm due to receive in a few days) do tailcap lockout easy enough because I do intend to keep it in a glovebox?
Well if anyone doesn’t like the SC01 then I can say the Roche F6 is flippin’ awesome for a few bucks more. I think it was $22 at Fasttech with the BLF discount.