Group Buy-BLF X6-SE OP update-GB over.

I’m in for 2, with the driver as RaceR86 suggested.

I agree this is best mode choice.
Thanks RaceR86!

H 3A (100%)
M 0,75A (25%)
L 0,035A (1,2%)
Quick off time mode memory
Low voltage warning from 2,7-3V (A double blink every 60sec or something like that)
Cut off below 2,7V”

Could they make it tail stand from the factory with out raising the price?

I’ll buy them either way.
The glass is good the way it is, as long as we can get that head apart to clean it if necessary.

I’m in for 1 at least, NW if possible. I agree with RaceR86’s mode choice.

I'm good for qty 2 for sure, maybe more. I'm good with the 3 mode ballpark figures RaceR86 proposed. A 4th mode at 50% is fine also, but again, just knowing from other guys and feedback I get about keeping the modes simple, mode count low preferred. Even for myself, I like 4 modes typically, or even 5, but it does get difficult to keep track, so I find myself cycling thru them all to be sure I'm on the one I want.

Ooops - forgot this: Must have assurance no threads are glued (thanx troisanh!)

in for one in CW NOT glued.

Forgot to add. Count me in for 1 light. Maybe two depending on price and how it turns out.

I would also like to see no glue, ability to tailstand and nice even anodizing (same color) on all parts if possible.

+1

neutral white if possible too

in for 1 light

I’d like to see a 50% mode, and hidden strobe. Other modes as RaceR86 suggested. Tailstand would be great. I don’t care about AR lenses or perfect anodizing, certainly not at this price range. Also would like to know how much they are going to increase the driver current. Is that up for discussion, or do they have that number?

Edit: For a good price, if we get at least a few of these mods, I’ll be in for one. For a better price, I’d get at least two.

I’d be in for one with the modes suggested by the OP, so long as it either has mode memory or starts on high.

Would prefer NW, but would accept CW.

One thing - tail standing. The review says it doesn’t tail stand due to the switch boot. Would it be possible to rectify this?

In for one, NW if possible

In for 2 more for sure, plus any more I can get friends to commit to.

Honestly my preference is for 3 mode, start on low with memory and be driven around 3.8A. Moon would be nice but with a thrower like this I’m more than good without it.

I really like my first one, I haven’t been this excited about a GB ever! Thanks Kron!

Put me down for 1. RaceR86’s mode suggestion is preferred.

I am in for 1 too.

Would prefer to have additional mode for 50% too. NW tint if possible. No glue. No blinkies

I will take 2 in this configuration.

put me down for one
racer recommendation please

Count me in, NW if possible.

…and thanks Krono!

I like racer86’s idea with one slight change…… I actually carry these lights to walk home after class. I really appreciate hidden strobes. Maybe a quick triple click to get to strobe? It’s only there if you need it, shouldn’t bother you otherwise.

I’d be in for one. No preference on modes unless y’all go with something stupid :smiley: . CW would be great. Thanks for the group buy!

I’ll be in for 1 (as long as they’re not glued shut)
Prefer 4 modes like the Qlite driver with moonlight, but it’s not a deal breaker for me.
I’m trying to save my flashlight budget for an Armytek Viking but this was too tempting…

I'm in, number depends on price. Any chance they'd sell hosts?