STARTED: GBGB: Stainless steel AAA clicky with a clip (CQG S1 "clone")

Bugger, good to hear it can handle the removal not too bad though.

I also took the clip off, and on, and off, and again i.i.r.c. without visible damage.

Btw, i just took mine apart by unscrewing the bezel, and i find a nice glass lens, an aluminium reflector, a g.t.i.d. O-ring, a (looks like) teflon washer, XP-E on tiny (8mm?) alu MPCB, and a tiny brass pill with a tiny driver.
A spring pushes the pill forward.

Sorry, didn’t take pictures…

Thanks for confirming my findings. :)

[quote=Jerommel] Sorry, didn't take pictures.. [/quote]

I did (see post #53)

Some measurements:
- pill diameter 10.8mm
- star diameter 7.8mm
- driver diameter 10.1mm
- emitter wires: short (almost stripped them by lifting the driver )
- driver cavity depth 4.0mm (3.0 + 1.0mm PCB)
- pill is solid, quite thin though

Some more photos of the pill:

Ah, missed that…
Thanks for the pics.


So, is it GITD or not? Or whatever g.t.i.d. is?

Glow In The Dark

http://www.urbandictionary.com/define.php?term=GTID

BOT: Mine doesn't glow at all.

Thanks again.

:beer:

@gearbest

How long is the processing? My order is still pending under processing.

Order No.:W1407102226414145

Mine does glow, a little… I have seen better, or maybe too little light hits it, dunno…
I got it from dealsmachine when it was on special offer.
Another CW (i suppose) from DX on the way and two NW of this deal.
(ordered seperately because the coupon only worked for 1 item at a time)

Ordered 2x NW + 2x CW. 8)

Just ordered 2 NW.
Thanks =the=!

Hope these come better packaged than the X3 GB lights

Do tell.

Not much to tell that isnt on the other GB thread. Packages shipped with THIN single layer of bubble wrap “tapped” to the host, no padding at all, thin boxes crushing due to no padding, over anodizing threads causing connection issues, connection issues causing HORRIBLE driver whining, loose/bad cut threads, oversized battery tube causing battery rattle, packages NOT shipping even with the 5 day promise, invalid tracking, etc……

Now add to this GB and MY current issues. Purchased last Monday (7/11), shipping notice on Friday (7/14), tracking still not working and when I just checked again I got this message “NOT RECOGNIZED”………so did I get a BS tracking code just to fake the shipment? Honestly GB could have a 95% success rate with the ‘dreamcharger’ but they arent doing so well with the XintD or this GB, IMO. It could be that only people with issues are speaking up but I havent seen many “success” posts.

Just check the order page on GB and I have various contradicting messages. Tracking bar on the top is at “pending”, order status is listed as “shipped out”, no tracking number on the page and also received a “shipped” email last Friday as stated above. So which one is it? Not hard to have everything coordinate, thing that erks me is that one the SAME PAGE, it shows contradicting info. Its like really? Cant even get the same page to agree with your info? Just not great IMO. I’m hoping its due to large volume and I do end up getting my package without issues but I’m not holding my breath anymore

Only time will tell but I’d like to know about my tracking and shipment

FYI Gearbest doesn’t give free tracking unless the order is $40, so if you only ordered one X3, you will not get a working tracking number…

Dear Livinloud, Thanks for your ordering from us. We wish to apologize for any inconvenience.Can you please tell us your order number? We will help you to check clearly and reply to you quickly.Thanks for your support.

Dear jopat, Thanks for your ordering with us. Because of the large orders shipments, we have sent out our first stock. Now we stock up and we will send out the rest of the orders in 2 days. Thank you very much for your kind understanding and support.

Best Regards
Gearbest.com

I got a working tracking number and I ordered only one. That was the deal. Tracking now shows it arrived in my country.

It wasn’t part of the deal. The groupbuy specifically said tracking wasn’t included.