STARTED: GBGB: Stainless steel AAA clicky with a clip (CQG S1 "clone")

Does it get hot quick with Eneloop battery? My CQG AAA, its sibling, starts gets hot after around 3-5 mins of use but still tolerable to hold.

Ok mine finally got here ..it took a fairly long time though .like 30 days .

i like the lights but the neutrals are definately not neutral they are warmer than anything I own .

the tint has to be in the low 2000k range lower than a 7A warm white .

for the money you can't complain ,,,and at that price you can't be bothered to swap emitters either unless you seriously love the light .

shrug ... probably should have bought at least one cw .

Dear all,

Really sorry for the shipping issue here disturbed everyone, we have progressed our shippment manner as you know and in this groupbuy, most of the shipping use HKPost, it is fast to ship to most of the countries but this is not absolute, to some countries it may be a little slow or sometimes it also comes slow in the fast countries. We will ensure to ship the orders (sometime we have no stocking we’ll email you to notice it) but after the ship it is the bussiness of logistics. And the tracking information on our website updated by couriers and it usually not update everytime for your tracking information, we recommend you to check your tracking information on other site (such as 17tracks) if you have your tracking number.
As our website has noticed it and I must notice here again, all estimated/typical delivery time are derived from real world data collected from past orders. They are approximate times for reference only. Shipping time will be affected during pulic hollidays, manufacturers and couriers will limit their operations at these times. This is outside our controll. Normal service resumes immediately after each hollidays.
For the issue of our refundment it was said ussually the pack will arrive in about 30 days but sometimes, unfortunately it may be late for longer time, so we estimate a limit as about 45 days to accept the refund if you still haven’t received the pack.
I’m really sorry for those who still have not recieved the light here, if you would like to PM me your order number, I can check it for you and do something for you maybe, and we’ll try our best to progress the shippment with your feedbacks here, thanks all the supporting here.

… Coupon expired

Received mine today and about half an hour later my AAA eneloops arrived, perfect timing :slight_smile: . I’m surprised by how flawless the finish is on these, great quality for such a low price. The NW is VERY warm, lucky I got a CW as well.

Aaaand mine isn’t arrived yet.

Really odd, my NW arrived in 7 days.

My CW still hasn’t arrived after almost a month now.

Ordered mere seconds apart, and shipped same day iirc.

Same here. I placed my order for one of each. I decided about 30 minutes later to order another one. I received the second order a week or so ago but the first order still shows origin post preparing shipment.

I will have PIC based linear (Li-ion only) direct replacement drivers available for them soon, flashable and current selectable (up to 4A) via resistor swapping.
OSHPark drivers with a 6-pin 10F322 (there is also the possibility of an attiny10 being a direct swap for AVR folks).

Because of the issues Werner mentions (tail spring and tiny pill) and the thin SS body I highly recommend not exceeding 1A, the drivers I build for them will be set to 225-500mA (but again can do up to 4A, current is based on a 1206 Sense resistor).

Damn GB over.

GearBest I wish you would consider making the price less than $7 shipped. I would get a few more but at $7.27 I will just buy the original S1 from CNQG.

Me too. If coupon expired…
I’ll wait until tomorrow.

Finally got mine. 11 business days.

I’m only running alkalines in it at the moment. I got the CW and I can say it is more of a pure white than “cool white.” I don’t know much about tints, but it is about as pure of a white light as I can imagine. (Like the color of a white sheet of paper)

I really like the little light. Looks pretty good in my work shirt’s pen holder pocket… and the finish is really nice as well.

I have 2 so called CW , which are rather neutral, the NW seems to be WW.

They haven’t arrived yet though…

Got mine today . Definitely warm with a fairly pronounced hotspot . Beautiful fit and finish and the clip is on there tight . ( Tight enough to trust .) Clicky is firm and easy to use .

I am happy with this purchase .Cool

Dear all,

Sorry for the mistake and our coupon is now available :wink: You can just buy this cute light at $5.99 still!

How to open to insert battery?

Unlike picture in OP, no seams to be found on body until 1/16th inch “bezel.” I hope I have to crank the bezel to open; don’t want to be using pliers on the on/off button!

BTW, terrific finish and no logo of any kind on the body.

Tailcap and clip unscrew from body —a section about 3/8” long from switch unscrews

PM sent, haven’t received my order, email says it shipped a month ago.

If the finish is good it’s barely seen. Just hold as close to the tail as you can and try to open it.