STARTED: GBGB: Stainless steel AAA clicky with a clip (CQG S1 "clone")

Works. Thanks.

The second ordered…

Oh boy.. Ordered 8 more... They will make a nice gift - very pleased with the 2.

Got 4 today, kind of neutral on these, there OK but nothing special or pretty nice but not that nice, if you know what I mean. These 4 will do, no reorder. The cw looks pretty good but the nw is very yellow.

Edit: After playing with them a little more, I like them better, buy one.

Thanks for the mod info here Tom E. Looking good.

I received 2 more today of the 6 I ordered. So I'm up up to 3 NW received. All have no logo and look and work great. I have 3 CW's on the way. Betting they have a logo give the above. I may try to polish them.

I finished my SF-348 mod from post #434. Don't have all views, but here's some:

Ok - think this mod is almost useless on a good Efest IMR 10440. Here's specifics:

  • XP-G2 S2 2C (from FT) on a 10 mm SinkPAD sanded down
  • high qual thermal grease under the SinkPAD
  • replaced wires with 24 AWG
  • NO-OX-ID around the pill, Nyogel on the threads

Light

Cell

Volts

Amps

Lumens (@start-@30s)

Stock SF-348

Primary Lithium

1.8v

0.50A

47-46

XP-G2/SinkPAD

Primary Lithium

1.8v

1.60A

82-72

Stock SF-348

Efest IMR10440 V1

4.14v

1.17A

160-138

XP-G2/SinkPAD

Efest IMR10440 V1

4.14v

2.70A

415-260**

Mod'ed light with the Efest goes into some sort of over-temp mode, because it starts blinking output in like 20 secs, and the top end of the light is extremely hot. Looks great though for the first 10 secs Smile. So, what's going on? Seems like the driver is in DD mode, but not sure if it's something I caused by the mod or not.

Ohh - my amps/lumens measurements are very close to what's listed in the FAQ section on the product page listing on GB (gearbest.com SF-348). Wonder where they got those #'s from...

Nice mod! Thanks for sharing.

Who would use the light more than 10s anyways? :D

Maybe from post #50? ;)

SmileSmile - stupid me, of course!

Shipped…!!!

@GearBest

I still haven’t received mine, ordered on July 16.
Order No.:W1407102226414145

Gearbest has really slow shipping so it maybe some time.

Just wait a little longer. I didn’t get mine until August 7th. I ordered them on July 7th.

I would like to see this light in a 2AAA form factor. It would be nice with XPG2.

1 arrived, 1 not yet…
Ordered seperately because the coupon only worked for 1 at a time at the time…
Guess it’ll be here when i get back form 2½ weeks France (Charente), hope so…
Clearly NW = WW and CW = NW
The WW is very warm, very much yellow, even orange-ish.
Unbranded flashlight, which i think is nice.

I ordered mine on July 7, shipped July 11 and not yet arrived. It’s still time.

Hi jopat,

I’ve received your order number and I’ll try to check it for you, will PM you after I got some informations :slight_smile:
Hope you would be patient to wait a few days it will come for sure :slight_smile:

Hi. I ordered mine on July 7 and still have not gotten them. Can you check mine as well? My order # is W1407071607282754
Thanks

My two from 7/11 haven’t showed either.
I guess we just wait.

Got my 2 in…AWESOME little lights…if you haven’t ordered one…get one, seriously!

Hi manxbuggy1,

Of course I can check it for you, I’ll PM you later if I get the informations too :slight_smile:

Hi, mine too ordered on July 7 and didn’t get it. Order # W1407070756233600, can you check it?

Thanks