For sale Sanyo blue tops 18650's SOLD

Count me in for 8 cells. How can I resist at that price? Are these unprotected?

PM sent.

Could you ship to Toronto, Canada? If so, how much to ship 10 of them? Thanks.

I’ll look it up and send you a PM, in a Minute.

PM replied to.

Shipping for ten batteries to Canada would be $10 so $20 total.

For the guys who paid yesterday your batteries are on the way.

I will take 10. PM me with payment info
larry

what state are these batteries in? salvageable? any nicks/dents? sanded off tabs? or any irregularities? Also can u guarantee say 1000mah minimum capacity? Also specs such as are the lenght, are they64mm? or exactly 65mm? I’ve pulled a few laptop ones before and I find keeping some solder and tabs on and bending them over helps the tailcap compression and helps alot since I’m using mostly protected batteries.

Howdy these are pretty much mint. The wrappers are all intact there is no glue residue. They used a wrap instead of glue. Maybe a couple little tacky spots from the wrap but nothing like glued ones. They pull apart very clean. The tabs are also coming off very easy. I knocking down any of the little bits of aluminum left after pulling them apart so no sharp stuff left on them. I can guarantee at least twice the 2000mAh minimum capacity.

They are Sony 2,600mAh batteries. The red top ones are 2,200 but you know how that goes. All of these are testing out at over 2,000 from each of the packs that I have pulled so far.

Are these unprotected cells I assume?

Yep unprotected.

I have purchased batteries from 18sixfifty before…on two separate occasions and batches

If he testes them and deems them “like new” or even “good enuff” GET THEM!

I also got batteries from Hagg911 (the same ones 18sixfifty is testing)

If you need GREAT budget batteries…these guys won’t let you down…get them, they also work impeccably in mobile power units, the blue tops are 2600mAh and they are true to theIR rating

If you have some Flashlights that use drivers with direct drive on high, these will amaze you at the additional output they can draw.
Some of the green wrapper Sony’s from previous laptop lulls of mine come close, but these are better.
The tops are flat so a solder blob is a good idea.
Later,
Keith

For the guys who paid, your batteries are on the way and I sent you a tracking number. If you paid and didn’t get one please PM me. I’m pretty sure though that everyone got their tracking number. The numbers will start working sometime this evening. Small town post office.

For anyone still interested I have a bunch more charged and tested and ready to go.

Just a quick update. My internet is lousy right now. So If I’m not quick getting back to you that is it.

Orders have been shipped and I have more batteries, charged, tested and sorted.

The batteries that were paid for shipped out today and your tracking numbers will start working sometime this evening.

Lets start with 5 and see how they work. PMing you .

I am so glad I got these! I paid for eight cells on Wednesday, Brad shipped them on Thursday morning with a solder blob top added, and I received them today Monday.

They look great, no sharp tabs and only some minor very small cuts in the wrapper on 50% of them. I cannot test mAh, but all tested between 4.13 and 4.22 volts on my DMM. I don’t have a caliper, but on my ruler they look like 64mm (almost 65mm with the added solder blob top). They have a red/pink wrapper with a blue top.

So they are too short to fit in my SkyRay King, but work great in my Tangsfire HD2010, my newly arrived Yezl Y-3, and my old school UltraFire WF-504b.

The cells also fit in my beloved Solarforce L2i that I won last year in a giveaway from Foy. He modded it and also added an infamous Foybenzel. It is well worn now, but still beautiful! It was his EDC, yet he still put it in a giveaway to share with BLF.

Where are you Foy? You are missed.

Foy?

Got them. Look great.
Thanks

Just to let everyone know, I have just gotten more of these in and have some ready to go.