FS: LD-1 driver (5Amp pwm-less linear)-SOLD

[B42]

@Billy X

I get the impression that 90% odd of those who complained of lack of amps in the X6 would not even wire the springs,let alone change a driver.They probably do not own a soldering iron,and many lights were for gifting without even opening the box.I’m sure the X6 group buy will generate orders for the Led4power driver,they are made for each other.But it will be in the dozens,not hundreds,because modders only,even if a simple mod.

Ahh, I don’t know, especially if it were say $10 range. +.3A seems to be what the spring wiring does from tested reports, this driver allows for a lot more significant results for the work than that, plus more functions/modes and no PWM!

[wight]

@B42

@Billy X

I get the impression that 90% odd of those who complained of lack of amps in the X6 would not even wire the springs,let alone change a driver.They probably do not own a soldering iron,and many lights were for gifting without even opening the box.I’m sure the X6 group buy will generate orders for the Led4power driver,they are made for each other.But it will be in the dozens,not hundreds,because modders only,even if a simple mod.

Ahh, I don’t know, especially if it were say $10 range. +.3A seems to be what the spring wiring does from tested reports, this driver allows for a lot more significant results for the work than that, plus more functions/modes and no PWM!

I haven’t followed the BLF X6 thread closely. Have driver swaps been documented for problem units?

[DavidEF]

@wight

@B42

@Billy X

I get the impression that 90% odd of those who complained of lack of amps in the X6 would not even wire the springs,let alone change a driver.They probably do not own a soldering iron,and many lights were for gifting without even opening the box.I’m sure the X6 group buy will generate orders for the Led4power driver,they are made for each other.But it will be in the dozens,not hundreds,because modders only,even if a simple mod.

Ahh, I don’t know, especially if it were say $10 range. +.3A seems to be what the spring wiring does from tested reports, this driver allows for a lot more significant results for the work than that, plus more functions/modes and no PWM!

I haven’t followed the BLF X6 thread closely. Have driver swaps been documented for problem units?

I don’t know about problem units, but driver swapping has definitely been done by Dale in a BLF X6 he modded for SB. Dale has said that the LD-1 is an easy switch-out for the stock driver and makes an impressive difference.

[wight]

@DavidEF

I don’t know about problem units, but driver swapping has definitely been done by Dale in a BLF X6 he modded for SB. Dale has said that the LD-1 is an easy switch-out for the stock driver and makes an impressive difference.

Unfortunately the ‘problem’ units are the ones that really matter when it comes to the topic of potentially popular driver swaps on the BLF X6. We all know that DBCstm is capable of squeezing high current out of a stone.

[Rufusbduck]

@wight

@DavidEF

I don’t know about problem units, but driver swapping has definitely been done by Dale in a BLF X6 he modded for SB. Dale has said that the LD-1 is an easy switch-out for the stock driver and makes an impressive difference.

Unfortunately the ‘problem’ units are the ones that really matter when it comes to the topic of potentially popular driver swaps on the BLF X6. We all know that DBCstm is capable of squeezing high current out of a stone.

Has to chuckle. I like what L4P has done here and hope it inspires him and others to continue this kind of effort. It doesn’t always pay off monetarily so something very like a GB can be helpful in spreading risk.

Djozz, for things that everyone uses like springs it might work to go ahead and set up a prepaid investment thread to purchase custom PB springs in a larger quantity since it would take the buying power of many of us combined to pull it off and commitment to buy from even more. A custom mcpcb would need this approach but one person would still have to be point man to set it up and disburse packets when ready.

[Mitko]

Hey Neven, whas up with those lovely drivers or yours? Still Cooking eh?

One of mine EEX6 is crying out loud for a driver like that

[led4power]

IN STOCK again.

[fireblade893]

PayPal sent for two items

Hopefully these will make the BLF X6 even better than it is now (Especially when the 25R batteries arrive)

Do these come with a spring mounted?

[prisma]

@led4power

IN STOCK again.

Thanks! PP sent.

[Mitko]

GG

PP sent for 3 pcs

[led4power]

@fireblade893

PayPal sent for two items Hopefully these will make the BLF X6 even better than it is now (Especially when the 25R batteries arrive) Do these come with a spring mounted?

No springs/wires mounted.

[Mike_C]

Just did the PayPal transfer for 3 pieces.

[dodo]

PP sent for 3 drives and tracking number

[kelsey]

Paypal sent for 3 drivers and tracking number. Looking forward to using these!

[chops728]

Sent Paypal for 3 drivers w/tracking Thanks

[khas]

PP sent for two drivers

[hank]

thank you

[Ray-o-light]

PP sent for 3 drivers

[Ray-o-light]

Sent funds for 2 more! Total of five.

[meti]

PP sent for 3 driver + tracking to Italy! Transaction ID 5DG521512B8626257.

Sorry to hear that our “poste” are so sh*t that you require tracking to ensure delivery to us italians…