tint canāt āgo to xp-g2ā
Tint is a matter of personal preference
tint canāt āgo to xp-g2ā
Tint is a matter of personal preference
Hey, thatās a great deal! Do you have one left?
Still using the one I got from OP a while back. It's a really nice light for the money.
Like I said, nice price. But xpg2 trumps in brightness. Unless of course, like tint preference, you prefer dimmer light.
Nice. is intl shipping price the same for more pcs?
Paypal sent for one. Thanks!
Payment sent, thanks for the deal.
Still a few lovelies left
Interesting light, I like the UI. Anyone stuffed an XP-L in one of these yet?
Edit: You werenāt kidding about the lock-tite, the head was a pain in the * to get apart, well worth it though.
I swapped the very thin aluminum MCPCB with a slightly modified Noctigon and a 5A1 XP-G2. Even with the warmer tint I ended up with a 16% increase in output.
Much nicer now.
Paypal Sent
Paypal sent for one.
Thanks.
I so want a couple or three of those to mod with neutral or hi-cri led! How did you disassemble the loc-tite-d head? What diameter PCB fits right in? Ideally I would buy some ready made noctigons just to solder the 2 wires to the board, as I have no modding experience nor time to try reflowing.
WOW! I just read specs and think this is a great deal! If I could, Iād buy two but at the moment Iām in some debtā¦ Vesture, Iāll post here if the funds show up. Thanks for the deal
I heated the head with a hot air gun, hot enough that I couldnāt hold it for any length of time but could touch it briefly. Put it in a vise and used a large strap wrench. Made a few small marks on the head even though I had it wrapped in heavy rubber.
The original MCPCB is 16mm x roughly 1.0mm but it has a couple of cut outs, you can see what it looks like in this excellent review of the MT21A by the. Slightly different light but the same set-up.
Noctigons are a little thicker, about 1.5mm but work fine.
You could get the emitter of choice pre-mounted and just spend a little time with a file to get it to work.
One more nice thing is the MCPCB is not glued down and has a great centering ring.
Paypal sent for 2pcs! Iām sending you a PM with shipping address. Thanks for the great deal!
Orders shipped
How many do you have left?
I still have 3 available.