Code now public! BLF A6 FET+7135 Light. Short 18350 tubes and Unanodized Lights Available

So will using A17DD-SO8? I’m in for 1 NW while waiting for further progress.

I would take one in NW

In

I'd like 1 x NW, please.

Interested in 1 NW, please.

1 NW pls

How would NW in this light compare to NW in the X6 BLF SE?

how does the A6 compare to the Convoy S2/3 ?

I would take one
Thanks

I’d be in for two.

Thanks!

Good Day Bugsy36,

As long as it takes Protected 18650 batteries, please put me down for 2 NW and 2 CW

Thank You Very Much,

George

Really can't say because I really do not know.

Are you referring to quality? I do not have one (A6) in my hand but both the Convoy and Eagle Eye are quality lights. I think that EE's anodizing is hard to beat (literally) when compared to any light.

Put me down for two - both neutral please! (sounds like a great GB)

Will this be equivalent to a convoy s2 stacked with 6 chips?
I need a couple tube lights that are bright.

Yes, quality but also design. Is there anything about one that is better than the other? Has anyone reviewed this light yet or are we going off of the qualtiy of other EE products?

It will be brighter depending on the battery used. The 7135's actually limit power were the FET does not.

I’m interested for 1 NW…if it fits protected cells and if the amperage is at least 2.8A.

Looks like a nice GB is coming ! :bigsmile:

NW AND protected cells will fit.

I myself am going off the quality of the other EE lights that I have/had: X6, X6-SE, X2, F30, F35

In stock form...I like the the LDCH driver because it is a 4-mode driver with a hidden strobe. For the BLF A6 I am proposing using Wight's driver (A17DD-SO8) which is not available in any light.

The head is very similar to that of the F30 minus fins (like the fins on the S8). The complete light disassembles into 4 pieces - Lens/bezel, Head, Tube, Tailcap.

Maybe if Neal is seeing this he can place a couple different protected batteries in the tube to say.

I know that on my EE's that I have...protected EVVA's fit but have to go in the head side of the tube because they have a thick heat-shrink and their label whereas the Samsung protected fit without any issues at all.