C3 with MT G2

Hi

Think at the moment the smallest Flashlight with MT G2

2 14250 battery
3 A Nanjg with Zenermod

1420 Lumen at start :evil:

rapidly decreasing LoL

It was an old flashlight,to neat to throw away…

Greets Xandre

Nice mod. A total flooder one would think. Just don't accidentally turn it on in your pocket.

turned on in your pocket, it is sure to keep the boys warm on a cold night

If you’re near the Kaiserslautern area, maybe a bunch of us could meet up someday!

That has to be crazy bright for the size.

Nice!

It is a real funny light.

You see the Output and can not believe it.

Hope you can get more of those cells and have some spare pockets. :stuck_out_tongue:

Hy,

last weekend, we did some beamshots in cologne and this little light got a neat GITD application :bigsmile:

Greetings

Kenjii

C3 MT-G2

Fenix TK35UE

Nice mod!

(Hmm, I have one MT-G2 leftover, let's see if I can beat that size )

a Trustfire Mini-01 MT-G2. :bigsmile:

The led does need 2 batteries in series though, with a boost driver there's not much current leftover. I was thinking 2x10180 in series with a 10mm zener-modded FET-driver . Hmm, that is quite a project actually, no promises here...

today I received my order ( 501b Cree XP-L V5 led flashligt ) which order from lightmalls.
http://www.lightmalls.com/ultrafire-wf-501b-smo-3-7-4-2v-cree-xp-l-v5-1a-1800lm-5-mode-led-flashlight-1x18650-battery

I can’t wait to test it and watch how powerful it is compare with Cree l2 ,U3 led ect .
Is anyone who has do some test about this led ?

That could work.
Like any light of this size crammed with a MT-G2 and two tiny cells its more for the short term wow-moment than any other real use as run time is likely to be mere seconds or just minutes.

That is where the driver comes in, with a 2% low setting the runtime is acceptable and the output is back to meh :-)

Thank you Kenjii for the beamshoots and Glowy :slight_smile:

at Zeng@LM What are you posting ?

Spamfuzzi or what ?