Please check to see if your name is in the right place with what you want!!!
through post #388
87 confirmed hosts
HOSTS
by your name means you have verified your order
1. n10sivern
2. n10sivern
3. n10sivern
4. n10sivern
5. n10sivern
6. Omega_17
7. moridin
8. pinkpanda3310
9. Kloepper Knife Works
10. Kloepper Knife Works
11. Kloepper Knife Works
12. Kloepper Knife Works
13. Kloepper Knife Works
14. Kloepper Knife Works
15. Kloepper Knife Works
16. Kloepper Knife Works
17. Kloepper Knife Works
18. Kloepper Knife Works
19. Kloepper Knife Works
20. Kloepper Knife Works
21. Kloepper Knife Works
22. Kloepper Knife Works
23. Kloepper Knife Works
24. L4M4
25. mizjif
26. mizjif
27. luminarium iaculator
29. luminarium iaculator
30. lumennoob
31. lumennoob
32. cajampa
33. Chazzy
34. hank
35. cfy7
36. Pulsar
37. Corin
38. Corin
39. freeme
40. freeme
41. MRsDNF
42. Billy X
43. Kozy
44. Kozy
45. Gj
46. Gj
47. Jensa41
48. Jensa41
49. Jensa41
50. Jensa41
51. Prometheus
52. djozz
53. Mitko
54. Mitko
55. Mitko
56. Mitko
57. Mitko
58. WillyD
59. dodo
60. Jubeldum
61. sedstar
62. sedstar
63. sedstar
64. nitro per PM
65. DayLighter
66. LinusHofmann
67. zizo
68. zizo
69. alphazeta
70. pieman7
71. mwfire per PM
72. Itinifni
73. Chicken Drumstick
74. dthrckt
75. dthrckt
76. dthrckt
77. dthrckt
78. dthrckt
79. gamezawy
80. PH_Oton per PM
81. PH_Oton per PM
82. will34
83. Marc
84. Buwuve
85. geten
86. will manners
87. grantman321
88.
89.
90.
91.
92.
93.
94.
95.
96.
97.
98. apt323 (PM sent)
99. tristanxoxo (PM sent)
100.
COMPLETE LIGHTS
or your name could go here
- raccoon city
- xandre
- Dempsey
- sesgum
- downlinx
- CASHESVALLEY
- meteorxs
- Chicken Drumstick
- logindetails
- mizjif
- cone
- cone
- ilovejesuschrist
- ilovejesuschrist
- Chipotle
- Aznsw1mr
- mrmatt
- Gerrit
- DBSAR
- Aardvark
- Muto
- tristanxoxo
- flashination
- tryps
- keengeorge
- keengeorge
- spamman
- TyBreaker
- JeffN
- akoposilester
- sedstar
- zelee
- Boaz
- cicciocant
- Leeuwenhoek
- BILL G
- BILL G
- cabfrank
- WillyD
- jealous57
- hein11ag
- NightSpy
- rs4ever
- rs4ever
- bladesmith3
- unknown00101
- cocoschnauzer
- Buwuve
- presterjohn
- southland
- southland
- southland
- beam0
- vuanhquoc
- vuanhquoc
- totilde
- Rusty Joe
- apt323
- apt323
- Werner
- was
- johnnie
- Yourrid
- Yourrid
- piotrek966
- piotrek966
- MXDan
- rickboone
- Kodachrome40
- piotrek966
Previous correspondence moved to here to keep from cluttering up the first post
I have been talking to szhomesafety,Co.,Ltd about a possible group buy on the UF-1504. Here is the company data sheet on the flashlight.
I informed him that there some interested in a working light and some interested in just a host. I believe in KISS (keep it simple stupid). I applaud kronological and others involved in the X6 group buy as it was just crazy. I don’t want to over complicate things with different tints and special modes, etc. If you want all of that, then purchase a host. For both lights I requested AR coated aspherical lens and brass/copper pill. For the complete light I figured a XP-G2 or XP-L on a copper star (XM-L2 is so close to a XPL therefore for ease of mcpcb’s all XM-L2 requests will be changed to XP-L). As for the driver, I figured a simple 3 mode with no blinkies at about 3A would suffice. I’m open to suggestions on the complete light, as I’m only interested in the host. Unfortunately, there is NO WAY POSSIBLE to please everybody with the current, modes, output for each mode level, certain LED’s, LED color and BIN. There are just too many choices and options which is why I think a host and a simple complete light is the best route.
Please post either “light” or “host” for which one you are wanting and how many. If you want the light, please post which LED and the majority will win. If you have any other suggestions or ideas for EASY, SIMPLE improvements that will not significantly delay production then lets hear them.
I do not have set prices yet, but the regular IR 1504’s sell for about $20 a piece plus they want about the same amount to ship.
UPDATE 3-20-2015
The original girl states she is leaving the company. She referred me to Sunny. Sunny states the will be able to have brass pills made. This will increase the price about $1. I can not get them to agree to have a DTP star and higher current driver. At this point, I have met resistance with dang near all my request for a complete light. They initially agreed then started striking through all my requests 1 by 1. I have come to the conclusion that I just don’t have the bargaining power of a larger company. I initially contacted a company to help with this group buy, but didn’t get much of a response. Fearing this would all fall to pieces, I turned to Gearbest. They already have one of the lowest prices on the UF-1405, so I can only assume that they can work magic on the UF-1504. I contacted Gearbest and after a long skype tonight, they seem enthusiastic to take over the group buy negotiations to make sure at least the host will happen. I’ll let them try to negotiate for a complete light themselves. I’ll leave the list up for the complete light just so they have an idea of what people wanted. I apologize that this didn’t go as smooth as I had hoped. It was and is a nice light that I’d like to see made available to everybody. That was the whole reason I got involved, just to get this to market for you all. I fell down and Gearbest picked me up. Hopefully, this will be made available soon and Gearbest can continue to provide to our flashlight community.
UPDATE 3-14-2015
Currently the company is waiting to find a source for DTP stars. I won’t have an update on price until they are able to find a source and their price. They wanted to use a cheap non-DTP copper star and I refused. So, currently waiting to hear back on if they found a source.
UPDATE 3-6-2015
According to Uniquefire, they can do a copper pill but would have to have 5000 orders. That isn’t going to happen. It may just not happen without lengthy production time and much higher cost.
In an effort to make everything easier for DTP pcb’s, I think the LED’s should stick with XP-L’s and XP-G2’s as they use the same pcb. The XM-L2’s and XP-L’s are so similar it only makes sense to simplify the pcb’s. Let me know if this is an issue. I think we might be able to offer a XP-L one and a XP-G2 one if we use the same pcb, instead of just offering a single light. Possibly the XP-L V6 2C and the XP-G2 S2 1D. Both would warm up with dedoming.
I asked for high quality springs and to make sure it has an Omten or Omten quality switch
As far as driver, if we can’t get a brass/copper pill then I don’t see a reason to try to use the AO17DD driver from the A6 group buy as I don’t think that the thermal pathway will handle the power. So, looking at a 3.04a 7135 driver if unable to get an upgraded