Review: NANJG 105A 2800mA driver

I know the 5 Pack of Kaidomain, thank you.

But if he speaks about "alot cheaper" I think he doesn't mean save only $0,36 for 5 driver.

I think he refers to buying the one that costs $6.63 a piece. x5 = $33.15

So when you compare it that way it is a lot cheaper.

That's what I think since on CPF some users thought that only the $6.63 SKU is the only 8*AMC7135 driver.

We’re lucky here in Australia, anything under $1000 doesn’t attract any duty :slight_smile:

Has anyone had issues when adding 7135s to these you loose the modes or did I just get a bad batch of drivers from KD they are 105c?

If they worked before adding 7135s, it's more likely you produced a short circuit. Check with a multimeter.

Thanks Tido I must be shorting something I just removed the 7135s put it back to stock and the modes work again. Sucks getting old.

I've just received three of this http://kaidomain.com/ProductDetails.aspx?ProductId=10995#

Nanjg 105C

$4.52 each

I took some photos.

I recently ordered additional 2 but KD will be processing/shipping orders by Next week. Longer waiting but its worth it.

That is great news I thought KD might be out of these I have been waiting over a month for mine.

Does this driver have a low battery warning?

By Brted on KD : "Starts blinking if battery is below 3 volts."

Read the review http://www.kaidomain.com/ProductDetails.aspx?ProductID=10995

Is it true. I have this driver on a XML and when battery is low, it starts blinking.

On the newer version of this driver the 105c it kicks down to The lowest mode when the battery gets low. I am not sure if it starts to flash eventually but when mine kicks to low for the second or third time I change it out. I don't like to push my batteries and I always carry a spare battery so it might start flashing in low but I am not sure.

Changed this to a Manafont XM-L dropin, very pleased. PWM is non-existent, takes solid 2,78A on High.

On med, quite loud whining but thats not a problem for me. Low is weak enough.

Hi guys i have a 105c i would like to make it a 3 mode, so by bridging star #2 from the right should be ok if ive read correct, im not a fan of flashy modes.

Yes second star from right to left, 3 modes no strobe.

The first star is also strobe-less, 2 modes.

awsome thanks.

what modes is the first star high low i would guess i have read the thread but i must of missed it

first- 2 modes (100%-20%)

second - 3 modes (100%-35%-4%)

The percentages are according to the OP.

However I've seen several taobao sellers saying,

100%-10%

100%-30%-5%

They could be referring to the older 105A. Pretty close specs anyway.

Is anyone selling these? KD links always seem to give me errors and i cant seem to find it myself.

It's available at Shiningbeam, KD, Intl-Outdoor, Lightmalls.