It can be done but i do not have a 9mm tool for the centre, so has to be done by hand!
Maybe I will take special requests
It can be done but i do not have a 9mm tool for the centre, so has to be done by hand!
Maybe I will take special requests
A couple of pictures:
Convoy C8 SMO with GITD gasket
Convoy C8 SMO with GITD gasket 1M away (ambient light from TV)
I’d be interested , usual suspects , XML-XPL-XPG.
I may need to get some more material!
The BLF Ti light with all those grooves and slots.Imagine flat GITD o rings in the base of those grooves , or “swiss roll” budget trits in the front slots :bigsmile: The possibilities are endless J)
Great /Excellent concept! Subscribed.
I’d want some for both xpg2 and xml2
Update:
PET gaskets:
XML2 standard 16mm
XPG2 standard 14mm
These are the only available PET gaskets, eg. If you buy a 20mm XML2 gasket it will have a 16mm gasket on top, if you buy a 16mm XPG2 it will have a 14mm gasket on top
14mm XPG and 16mm XML will be a perfect fit as they are the standard ones
For those who have used the flat PET gaskets you will know what I mean!
OP has been updated with this info
interested in some for XPG2 16mm*
Ready for sale!
I have 100+ stock of the XPG2 gaskets, but lower quantity of XML2, expecting a delivery of 100+ XML2 next week, so first come first serve!
XML2 temporarily sold out!
All orders shipped, XML2 re-stock expected next week
100 XML2 back in stock!
I ordered a few for the xml2. When they arrive I will post my review here if that’s OK by the OP.
Yes that’s fine, I’m fine with criticism if there is any, it makes me improve!
Here here :party:
wow talk about fast shipping! perfect fit! A+
Edit, fixed errors
5 days from UK to USA!
Were they hard to fit without the PET gasket on top?
No they just don’t sit flush againced a flat surface except the solder blobs for the neg and pos. I should have gotten some gaskets. You cannot tell there just floating and they fit the emitter perfect without an issue. You plan on making any for XHP series?
No plans as of yet for MTG2 or XHP70, going to be pretty busy for the next couple of months so no time for experimentation