WTS: Clearout parts box part 2

5 posts / 0 new
Last post
3Tronics
3Tronics's picture
Offline
Last seen: 9 months 2 weeks ago
Joined: 07/29/2014 - 15:14
Posts: 825
Location: UK
WTS: Clearout parts box part 2

Clear out parts box part 2!

£40 shipped UK
£45 shipped international

Everything in the picture:

MCPCB’s
LEDs
MCU’s
Springs
Drivers
Wire 22/20/18/24 AWG silicone
Etc etc

! photo image.jpg1_zpsm8s5gxnc.jpg!

Custom builds | Modifications | Powder Coating 
Gallery: Instagram

Edited by: 3Tronics on 04/29/2015 - 18:04
ReAvenger
ReAvenger's picture
Offline
Last seen: 9 months 6 days ago
Joined: 08/26/2014 - 09:52
Posts: 90
Location: Australia

I’m assuming that most of the drivers and leds would work if slapped into a host, and not just for part scavenging

itsonlyme
Offline
Last seen: 6 months 1 week ago
Joined: 02/21/2015 - 10:05
Posts: 579
Location: Uk

Have all the LEDs been dedomed and is it being sold as one lot and won’t be split?

3Tronics
3Tronics's picture
Offline
Last seen: 9 months 2 weeks ago
Joined: 07/29/2014 - 15:14
Posts: 825
Location: UK
ReAvenger wrote:
I’m assuming that most of the drivers and leds would work if slapped into a host, and not just for part scavenging

Not tested, as with the last ‘clear out box’ I did it’s just leftovers some will work some won’t

Custom builds | Modifications | Powder Coating 
Gallery: Instagram

3Tronics
3Tronics's picture
Offline
Last seen: 9 months 2 weeks ago
Joined: 07/29/2014 - 15:14
Posts: 825
Location: UK
itsonlyme wrote:
Have all the LEDs been dedomed and is it being sold as one lot and won’t be split?

They are all de domed or sliced, sold as one lot for now, it wouldn’t really be worth the time splitting it all (very busy lately)

Custom builds | Modifications | Powder Coating 
Gallery: Instagram